<1><資訊中心首頁><icmain.htm>
<2><概觀及新增功能><icoverview.htm>
<2><可列印的 PDF><icpdflist.htm>
<2><資訊中心常見問題集><icfaq.htm>
<2><資訊中心更新><icupdates.htm>
<2><現在位於資訊中心的 pSeries 文件><icpserieslist.htm>
<2><網站地圖><icsitemap.htm>
<1><Planning><iphadkickoff.htm>
<1><Initial server setup><iphaf/iphafisskickoff.htm>
<2><What's new><iphaf/whatsnew.htm>
<2><Printable PDFs><iphaf/iphafprintpdfs.htm>
<2><Creating a customized setup checklist><iphaf/issintwelcome.htm>
<2><Using predefined setup checklists><iphaf/iphafpredefined.htm>
<3><Models 520, 9113-550 without LPAR><iphaf/predefcsunolpar.htm>
<3><Models 520, 9113-550 with LPAR><iphaf/predefcsulpar.htm>
<3><Models 9406-550, 570 without LPAR><iphaf/predefcenolpar.htm>
<3><Models 9406-550, 570 with LPAR><iphaf/predefcelpar.htm>
<3><All models><iphaf/iphafentire.htm>
<2><Related information><iphaf/iphafrelatedinfo.htm>
<1><Migrating or upgrading your server><iphbj/kickoff.htm>
<2><iSeries systems><iphbj/iserieskickoff.htm>
<3><Upgrades><iphbg/iphbgkickoff.htm>
<4><What's new><iphbg/whatnew.htm>
<4><Printable PDFs><iphbg/hdrprint.htm>
<4><Upgrade concepts><iphbg/hdrconcepts.htm>
<5><Upgrade terminology><iphbg/rzamdupgradeterms.htm>
<5><Upgrade paths><iphbg/hdrpaths.htm>
<5><Upgrade timeline><iphbg/hdrconcept.htm>
<4><Upgrade checklist><iphbg/checklist.htm>
<4><Upgrading the server><iphbg/hdrupgradesteps.htm>
<5><Upgrade planning tasks><iphbg/planningtasks.htm>
<5><Order tasks><iphbg/ordertasks.htm>
<6><Configuring your order><iphbg/configorder.htm>
<6><Validating your order><iphbg/validateorder.htm>
<6><Validating your upgrade project plan><iphbg/validateprojectp.htm>
<6><Placing your order><iphbg/placeorder.htm>
<5><Preparation tasks><iphbg/preparationtasks.htm>
<6><Confirming your upgrade schedule><iphbg/confirmschedule.htm>
<6><Preparing your environment><iphbg/prepareenvironment.htm>
<7><Adding, replacing, or removing a hardware feature><iphbg/addreplacehdwfeature.htm>
<8><Preparing for feature upgrade><iphbg/hdrprocinst.htm>
<8><Performing the feature upgrade><iphbg/hdrfeatureupgradedonelpar.htm>
<8><Performing resource management><iphbg/hdrresourcemgmtlpar.htm>
<7><Activating inactive resources><iphbg/hdrswupgrade.htm>
<7><Converting expansion units for a partitioned server><iphbg/rzamdexpanupgradelpar.htm>
<8><Expansion unit conversion paths and considerations><iphbg/exunitpathscon.htm>
<8><Preparing to convert the expansion unit><iphbg/rzamdprepexpanupgradelpar.htm>
<9><Resequencing SPCN addressing><iphbg/rzamdexpanupgradelparspcn.htm>
<9><Printing and preparing the configuration for expansion unit conversion><iphbg/rzamdexpanupgradelpardoc.htm>
<7><Cleaning up disk storage><iphbg/cleandisks.htm>
<7><Cleaning up system hardware><iphbg/cleansystem.htm>
<7><Adjusting memory and processing resources><iphbg/adjustmemproc.htm>
<7><Changing configuration objects><iphbg/changeobject.htm>
<7><Gathering performance data><iphbg/gatherperfdata.htm>
<7><Preparing your console><iphbg/prepareconsole.htm>
<7><Backing up data><iphbg/backupdata.htm>
<6><Developing your test plan><iphbg/developtestplan.htm>
<6><Scheduling your acceptance review><iphbg/schedulereview.htm>
<5><Preinstallation tasks><iphbg/preinstallationtasks.htm>
<6><Printing system information><iphbg/printsystem.htm>
<6><Copying LPAR configuration to diskette><iphbg/copylparconfig.htm>
<6><Recording user IDs and passwords><iphbg/recorduserid.htm>
<6><Preparing your location for the upgrade><iphbg/preparelocation.htm>
<6><Reviewing your project and contingency plans><iphbg/reviewplans.htm>
<5><Installation tasks><iphbg/installationtasks.htm>
<6><Ensuring you have completed the necessary tasks><iphbg/completetasks.htm>
<6><Installing software><iphbg/installsw.htm>
<7><Upgrading i5/OS and related software><iphbg/uptov5r3.htm>
<7><Upgrading and preparing Linux for server upgrade><iphbg/preplinux.htm>
<7><Installing fixes><iphbg/installfixes.htm>
<7><Backing up system><iphbg/systembackup.htm>
<6><Installing hardware><iphbg/installhardware.htm>
<7><Completing final system preparations for upgrade><iphbg/finalpreptasks.htm>
<7><Providing checklists and system information><iphbg/validatereadiness.htm>
<7><Shutting down your system><iphbg/shutdownhandoff.htm>
<7><Performing hardware installation (authorized service provider)><iphbg/servicereptasks.htm>
<7><Receiving the target system><iphbg/machineacceptance.htm>
<5><Postinstallation tasks><iphbg/postinstallationtasks.htm>
<6><Finalizing system configuration><iphbg/finalizeconfig.htm>
<6><Saving system partitions and all firmware><iphbg/savesystem.htm>
<6><Testing your system><iphbg/testsystem.htm>
<4><Scenarios: Upgrades><iphbg/scenarios.htm>
<4><Troubleshooting><iphbg/troubles.htm>
<4><Related information><iphbg/hdrrelatedinfo.htm>
<3><Data migration><iphbh/hdrkickoff.htm>
<4><What's new><iphbh/hdrwhatnew.htm>
<4><Printable PDF><iphbh/hdrprint.htm>
<4><Concepts><iphbh/concepts.htm>
<4><Planning your data migration><iphbh/hdrplanmigration.htm>
<5><Hardware considerations for data migration planning><iphbh/planhardw.htm>
<5><Software considerations for data migration planning><iphbh/plansoftw.htm>
<5><Console considerations for data migration planning><iphbh/planconn.htm>
<5><Recording the data migration plan><iphbh/finishplan.htm>
<4><Preparing for data migration><iphbh/hdrmigrationprep.htm>
<5><Preparing for data migration with OS/400 V5R3 on the source server><iphbh/migratev5r3.htm>
<5><Preparing for data migration from V5R1 or V5R2><iphbh/hdmigrationprep45xx.htm>
<5><Preparing for data migration from SUSE LINUX Enterprise Server 9><iphbh/prepsuselinux.htm>
<4><Performing your data migration><iphbh/performing.htm>
<5><Completing the data migration with OS/400 V5R3 on the source server><iphbh/hdrmigrationproc.htm>
<5><Completing the data migration from V5R1 or V5R2><iphbh/hdrmigrationproc45xx.htm>
<5><Completing the data migration from SUSE LINUX Enterprise Server 9><iphbh/completesuselinux.htm>
<4><Scenarios: Data migration><iphbh/scenarios.htm>
<4><Troubleshooting><iphbh/troubles.htm>
<4><Related information><iphbh/relinfo.htm>
<2><pSeries systems><iphbj/pserieskickoff.htm>
<3><Upgrades for pSeries systems><iphbm/iphbmkickoff.htm>
<4><Printable PDFs><iphbm/iphbmprintthis.htm>
<4><Concepts><iphbm/iphbmconcepts.htm>
<5><Upgrade paths><iphbm/iphbmpaths.htm>
<5><Upgrade considerations><iphbm/iphbm_upgrade_considerations.htm>
<5><Upgrade terminology for pSeries><iphbm/iphbmupgradeterms.htm>
<4><Upgrade checklist><iphbm/iphbmupgradechecklist.htm>
<4><Ordering Tasks><iphbm/iphbmorder.htm>
<5><Configuring your order><iphbm/iphbm_configorder.htm>
<5><Validating your order><iphbm/iphbm_validateorder.htm>
<5><Validating your upgrade project plan><iphbm/iphbm_validateprojectp.htm>
<5><Placing your order><iphbm/iphbm_placeorder.htm>
<4><Planning your upgrade><iphbm/iphbmplanupgrade.htm>
<5><Upgrade planning tasks><iphbm/iphbm_plan_checklist.htm>
<5><Confirming your upgrade schedule><iphbm/iphbmschedule.htm>
<5><Cleaning up disk storage><iphbm/iphbmcleanupdisk.htm>
<5><Adjusting memory and processing resources><iphbm/iphbmadjustmem.htm>
<5><Preparing your console><iphbm/iphbmpreparecon.htm>
<5><Developing your test plan><iphbm/iphbmdeveloptest.htm>
<5><Scheduling your acceptance review><iphbm/iphbmacceptreview.htm>
<4><Preparing for upgrade for pSeries><iphbm/iphbmprepare.htm>
<5><Software considerations><iphbm/iphbm_sw_considerations.htm>
<5><System backup requirements><iphbm/iphbm_sys_backup.htm>
<5><Preparing your location for the upgrade><iphbm/iphbmlocation.htm>
<5><Reviewing your project and contingency plans><iphbm/iphbmcontingency.htm>
<5><Running the AIX pre_migration script><iphbm/iphbm_run_premigration.htm>
<4><Performing your upgrade><iphbm/iphbmupgradetasks.htm>
<5><Updating AIX with a new maintenance level><iphbm/iphbm_updateall_howto.htm>
<5><Migrating AIX to a new version or release><iphbm/iphbm_migration_howto.htm>
<5><Backing up AIX to CD><iphbm/iphbmbackup.htm>
<5><Configuring the HMC management environment><ipha1/configuringyourhmcmanagementenvironment.htm>
<5><Saving your existing partition profiles from a Hardware Management Console><iphbm/iphbm_migrate_part.htm>
<5><Restore an AIX system backup from CD><iphbm/iphbm_update_profiles.htm>
<4><Scenarios: pSeries upgrades><iphbm/iphbmupgradescenarios.htm>
<5><Upgrading a pSeries 650 with an HMC to a p5 570 with an HMC><iphbm/iphbm_p650_p570_hmc.htm>
<5><Upgrading a pSeries 650 without an HMC to a p5 570 without an HMC><iphbm/iphbm_p650_p570_no_hmc.htm>
<5><Upgrading a pSeries 650 without an HMC to a p5 570 with an HMC><iphbm/iphbm_p650_p570_mix.htm>
<4><Testing your system><iphbm/iphbmtesting.htm>
<4><Troubleshooting the upgrade><iphbm/iphbmupgradetroubleshoot.htm>
<4><Related information><iphbm/iphbmupgraderelatedinfo.htm>
<1><Virtualizing your computing environment><iphb1/kickoff.htm>
<2><Printable PDFs><iphb1/printablepdfs.htm>
<2><Concepts for a virtual computing environment><iphb1/whatisvirtualization.htm>
<3><The Virtualization Engine><iphb1/virtualizationengine.htm>
<3><POWER Hypervisor><iphb1/virthypervisor.htm>
<3><Micro-Partitioning><iphb1/virtmicropart.htm>
<3><Virtual I/O Server><iphb1/virtio.htm>
<3><Virtual Ethernet><iphb1/virtethernet.htm>
<3><Shared Ethernet Adapter><iphb1/virtshafredethernetadapt.htm>
<3><Capacity on demand><iphb1/virtcod.htm>
<3><Multiple operating system support><iphb1/virtmultossup.htm>
<2><Planning for your virtualized environment><iphb1/planningforyourvirtualizedenvironment.htm>
<2><Dividing a single server into multiple servers><iphb1/dividingasingleserverintomultipleservers.htm>
<2><Dynamically managing logical partition resources><iphb1/dynamicallyaddingresources.htm>
<1><Installing hardware><iphag/installhardware.htm>
<2><Cabling your server><iphah/cablekickoff.htm>
<3><Printable PDF><iphah/printiphah.htm>
<3><Cable your model 520 server with a console><iphah/e520.htm>
<4><Advanced System Management Interface (ASMI)><iphah/e520asmieu.htm>
<4><Hardware Management Console (HMC)><iphah/e520hmceu.htm>
<4><Operations Console><iphah/e520opsconeu.htm>
<4><Twinaxial console><iphah/e520twineu.htm>
<4><Schematic diagrams of a model 520 server><iphah/e520graphic.htm>
<3><Cable your model 550 server with a console><iphah/e550.htm>
<4><Advanced System Management Interface (ASMI)><iphah/e550asmieu.htm>
<4><Hardware Management Console (HMC)><iphah/e550hmceu.htm>
<4><Operations Console><iphah/e550opsconeu.htm>
<4><Twinaxial console><iphah/e550twineu.htm>
<4><Schematic diagrams of a model 550 server><iphah/e550.htm>
<3><Cable your model 570 server with a console><iphah/e570.htm>
<4><Advanced System Management Interface (ASMI)><iphah/e570asmieu.htm>
<4><Hardware Management Console (HMC)><iphah/e570hmceu.htm>
<4><Operations Console><iphah/e570opsconeu.htm>
<4><Twinaxial console><iphah/e570twineu.htm>
<4><Schematic diagrams of a model 570 server><iphah/e570.htm>
<2><Adding a console><iphai/addconsole.htm>
<3><Hardware Management Console><iphai/hmc.htm>
<4><What's new><iphai/whatsnew.htm>
<4><Printable PDF><iphai/printhmcpdf.htm>
<4><Before you begin:  About the HMC><iphai/concepts.htm>
<5><Implementations of Hardware Management Consoles><iphai/hmctypes.htm>
<5><Predefined passwords><iphai/whychgprepwds.htm>
<5><Installation requirements for the remote client><iphai/remoteinstallreqs.htm>
<5><Remote client comparison><iphai/staticvswebstart.htm>
<5><System Manager Security><iphai/clientserver.htm>
<4><Setting up the HMC><iphai/installhmc.htm>
<5><Cabling the HMC><iphai/cable.htm>
<5><Gathering required configuration settings><iphai/prep.htm>
<5><Configuring the HMC><iphai/configure.htm>
<6><Fast path configuration using the Guided Setup wizard><iphai/fastpathgs.htm>
<6><Using the Guided Setup wizard><iphai/confighmcgs.htm>
<6><Using the HMC configuration checklist><iphai/configchklst.htm>
<4><Installing and uninstalling the remote client><iphai/remotehmc.htm>
<5><Installing the Web-based System Manager Remote Client for Java Web Start><iphai/installwebstart.htm>
<5><Uninstalling the Web-based System Manager Remote Client for Java Web Start><iphai/uninstallwebstart.htm>
<5><Installing the Web-based System Manager Remote Client><iphai/installstatic.htm>
<5><Uninstalling the Web-based System Manager Remote Client><iphai/uninstallstatic.htm>
<5><Configuring System Manager Security><iphai/securehmc.htm>
<6><Configuring one HMC as a CA><iphai/confighmcasca.htm>
<6><Generating private key ring files><iphai/generatekrf.htm>
<6><Installing private key ring files><iphai/installkrf.htm>
<6><Distributing the CA's public key><iphai/distpubkey.htm>
<6><Viewing configuration properties><iphai/viewprops.htm>
<6><Configuring HMC object manager security><iphai/configobmansec.htm>
<4><Changing the console that manages i5/OS><iphai/chgos400con.htm>
<5><HMC to Operations Console><iphai/hmctoops.htm>
<5><HMC to twinaxial console><iphai/hmctotwinax.htm>
<5><Operations Console to HMC><iphai/opstohmc.htm>
<5><Twinaxial console to HMC><iphai/twinaxtohmc.htm>
<4><Troubleshooting><iphai/troubleshoot.htm>
<4><Related information><iphai/relatedinfo.htm>
<3><Advanced System Management Interface><iphby/asmi.htm>
<3><Operations Console><iphbx/opsconsole.htm>
<3><Twinaxial console><iphbn/kickoff.htm>
<3><Graphics terminal><iphai/graphics.htm>
<2><Installing features and replacing parts><iphaj/installcifcio.htm>
<3><What's new><iphaj/whatsnew.htm>
<3><Select by model or expansion unit><iphaj/selectmodel.htm>
<4><520><iphaj/iphw2.htm>
<4><550><iphaj/iphw4.htm>
<4><570><iphaj/iphwm.htm>
<4><5074 and 5079><iphaj/ipheu5074.htm>
<4><5088 and 0588><iphaj/ipheu5088.htm>
<4><5094 and 5294><iphaj/ipheu5094.htm>
<4><5095 and 0595><iphaj/ipheu5095.htm>
<4><7311-D11><iphaj/ipheu7311d11.htm>
<4><7311-D20><iphaj/ipheu7311d20.htm>
<3><Select by feature or part><iphaj/selectcifcio.htm>
<1><分割伺服器><iphat/iphatlparkickoff.htm>
<2><新增功能><iphat/iphatwhatsnew.htm>
<2><可列印的 PDF><iphat/iphatprintpdfs.htm>
<2><分割伺服器的概念><iphat/iphatlparconceptskickoff.htm>
<3><分割區的益處><iphat/iphatlparbenefits.htm>
<3><邏輯分割區配置類型><iphat/iphatlpartypes.htm>
<4><邏輯分割區><iphat/iphatlparchoices.htm>
<4><出廠預設配置><iphat/iphatlparmgc.htm>
<4><服務分割區><iphat/iphatservicelpar.htm>
<4><虛擬 I/O 伺服器分割><iphat/iphatvirtualioserveroverview.htm>
<3><分割系統的元件><iphat/iphatlparcomponents.htm>
<4><受管理的系統><iphat/iphatmanagesys.htm>
<4><設定檔><iphat/iphatlparprofiles.htm>
<5><分割區設定檔><iphat/iphatparprofile.htm>
<5><具備所有系統資源的分割區設定檔><iphat/iphatfullsystem.htm>
<5><系統設定檔><iphat/iphatsysprofile.htm>
<3><硬體資源><iphat/iphatlparhw.htm>
<4><最少配置><iphat/iphatlparosmin.htm>
<5><AIX><iphbk/iphbkaixminreqs.htm>
<5><i5/OS><iphbl/iphbllparosmin.htm>
<5><Linux><iphbi/iphbiminimumconfig.htm>
<4><實體與虛擬硬體資源><iphat/iphatphysicalvsvirtual.htm>
<5><虛擬配接卡><iphbi/iphbivirtualadapters.htm>
<5><每個 OS 如何實作虛擬資源><iphat/iphatosvirtualoverview.htm>
<6><AIX><iphat/iphataixvirtual.htm>
<6><i5/OS><iphat/iphati5osvirtual.htm>
<7><虛擬序列配接卡><iphbi/iphbivirtualserial.htm>
<7><虛擬 SCSI><iphbi/iphbivirtualscsi.htm>
<6><Linux><iphat/iphatlinuxvirtual.htm>
<5><處理器><iphat/iphatlparprocessor.htm>
<6><專用處理器><iphat/iphatdedproc.htm>
<6><共用處理器><iphat/iphatsharedproc.htm>
<7><虛擬處理器><iphat/iphatvirtualproc.htm>
<7><i5/OS 授權合約的注意事項><iphbl/iphblos400license.htm>
<5><記憶體><iphat/iphatlparmemory.htm>
<6><AIX 邏輯分割區的記憶體><iphbk/iphbkaixmemreqs.htm>
<6><i5/OS 邏輯分割區的記憶體><iphbl/iphbllparmemory.htm>
<6><Linux 邏輯分割區的記憶體><iphbi/iphbilinuxmemory.htm>
<5><擴充裝置><iphat/iphatexpansionunit.htm>
<5><主控台><iphat/iphatlparconsole.htm>
<6><HMC><iphat/iphathmc.htm>
<6><作業主控台><iphat/iphatoperationsconsole.htm>
<6><雙軸主控台><iphat/iphattwinax.htm>
<5><I/O><iphbl/iphbliodevices.htm>
<6><I/O 儲存區><iphbl/iphbliopools.htm>
<6><IOP><iphbl/iphbllpariop.htm>
<7><標記資源><iphbl/iphbltag.htm>
<7><可切換的裝置><iphbl/iphblswitchiop.htm>
<6><IOA><iphbl/iphbllparioa.htm>
<7><載入來源><iphbl/iphblloadsrc.htm>
<7><替代性重新啟動裝置><iphbl/iphblaltipl.htm>
<7><硬碟機><iphbl/iphbldunit.htm>
<5><5250 CPW><iphbl/iphblinterperform.htm>
<3><邏輯分割區的通訊選項><iphat/iphatlparcommunication.htm>
<4><虛擬乙太網路><iphat/iphatvirtualethernetoverview.htm>
<5><AIX 的虛擬乙太網路><iphat/iphatvirtualethernetaix.htm>
<5><i5/OS 的虛擬乙太網路><iphat/iphatvirtualetherneti5os.htm>
<5><Linux 的虛擬乙太網路><iphat/iphatvirtualethernetlinux.htm>
<4><HSL OptiConnect><iphbl/iphblhslopticonnect.htm>
<4><虛擬 OptiConnect><iphbl/iphblvirtualopticonnect.htm>
<3><邏輯分割區公用程式><iphat/iphatlparutilities.htm>
<4><LPAR 驗證工具><iphat/iphatlvt.htm>
<4><分割區載入管理程式><iphat/iphatplmoverview.htm>
<2><分割 AIX><iphbk/iphbkaixkickoff.htm>
<3><Partitioning for AIX><iphbk/iphbkaixkickoff.htm>
<4><What's new><iphbk/iphbkaixwhatsnew.htm>
<4><Printable PDFs><iphbk/iphbkprintthis.htm>
<4><Scenarios><iphbk/iphbkaixscenarios.htm>
<5><Scenario: Using partition profiles><iphat/iphatscenario1.htm>
<5><Scenario: Using system profiles><iphbk/iphatscenario2.htm>
<5><Scenario: Creating an AIX logical partition and partition profile><iphbk/iphbkscenario_config_aix_lpar.htm>
<5><Scenario: Using the HMC through a remote PC client><iphbk/iphbkscenario_remote_pc_client.htm>
<4><Planning for AIX logical partitions><iphae/aixpartitions.htm>
<4><Configuring AIX logical partitions><iphbk/iphbkaixconfigure.htm>
<5><Creating logical partitions and partition profiles><iphbl/iphblcreatelpar.htm>
<5><Creating additional partition profiles><iphbl/iphblcreateprofile.htm>
<5><Designating a service partition for your managed system><iphbl/iphblservicepartition.htm>
<5><Creating partitions from the manufacturing default configuration><iphbl/iphbldefaultlpar.htm>
<5><Migrating a logical partition><iphbm/iphbmkickoff.htm>
<5><Copying a partition profile><iphbl/iphblcopyprofile.htm>
<5><Creating a system profile><iphbl/iphblsysprofile.htm>
<5><Copying a system profile><iphbl/iphblcopysysp.htm>
<5><Creating an AIX partition that receives i5/OS resources><iphbl/iphblaixpartition.htm>
<5><Deleting a logical partition><iphbl/iphbldeletelpar.htm>
<5><Resetting the server><iphbl/iphblresetserver.htm>
<4><Configuring resource manangement for AIX partitions using Partition Load Manager><iphbk/iphbkconfigureplm.htm>
<5><Installing Partition Load Manager><iphbk/iphbkinstplm.htm>
<5><Installing OpenSSH software tools><iphbk/iphbkopenssh.htm>
<5><Configuring Resource Management and Control><iphbk/iphbkrmc_configuration.htm>
<5><Configuring the policy file><iphbk/iphbkpolicy_file_configuration.htm>
<5><Verifying the installation and configuration><iphbk/iphbkverifyinst.htm>
<6><Verifying the OpenSSH installation><iphbk/iphbkverifysshinst.htm>
<6><Verifying the Resource Management and Control configuration><iphbk/iphbkverifyrmc.htm>
<4><Managing AIX logical partitions><iphbk/iphbkaixmanage.htm>
<5><Managing partition profiles for logical partitions><iphbk/iphblmanagepprofile.htm>
<6><Activating a partition profile><iphbk/iphblactivate.htm>
<6><Changing partition profile properties><iphbk/iphblchangeprofile.htm>
<6><Deleting a partition profile><iphbk/iphbldeleteprofile.htm>
<5><Managing system profiles for logical partitions><iphbk/iphblmanagesprofile.htm>
<6><Activating a system profile><iphbk/iphblactivatesysprofile.htm>
<6><Deleting a system profile><iphbk/iphbldeletesysprofile.htm>
<5><Dynamically managing AIX logical partition resources><iphbk/iphbkaixmanagedynamic.htm>
<6><Dynamically managing physical I/O devices or slots><iphbk/iphbldlpariop.htm>
<6><Dynamically managing processing power><iphbk/iphbldlparprocpower.htm>
<6><Dynamically managing memory><iphbk/iphbldlparmemory.htm>
<6><Scheduling dynamic resource movement><iphbk/iphblschedulelpar.htm>
<5><Managing partitions remotely><iphbk/iphblpartitionremote.htm>
<5><Querying partition status><iphbk/iphbkquerystatus.htm>
<5><Managing AIX partitions using i5/OS><iphbk/iphblaixmanagingkickoff.htm>
<6><Adding virtual disks to an AIX partition><iphbk/iphbldynamicallyaddingaixdisks.htm>
<6><Managing network server descriptions><iphbk/iphblaixnwsdoverview.htm>
<7><Linking NWSSTG among NSWDs><iphbk/iphblaixlinknwsstg.htm>
<7><Deleting NSWDs><iphbk/iphblaixdeletenwsd.htm>
<7><Deleting disk drives><iphbk/iphblaixdelete.htm>
<6><Using IPL types when running AIX><iphbk/iphblaixbootsource.htm>
<6><Backing up and recovering AIX partitions that receive i5/OS recources><iphbk/iphblaixrecoverykickoff.htm>
<7><Using the tar command><iphbk/iphblaixsavrstaixtar.htm>
<7><Using i5/OS commands><iphbk/iphblos400commandaix.htm>
<6><Backing up the NWSD and disk drives associated with AIX><iphbk/iphblaixbackup.htm>
<7><Backing up NWSDs for an AIX partition><iphbk/iphblaixbackupnwsd.htm>
<7><Restoring NWSDs for an AIX partition><iphbk/iphblaixrestore.htm>
<7><Unlinking disk drives from an AIX partition><iphbk/iphblaixunlink.htm>
<8><Saving server objects in i5/OS><iphbk/iphblaixobjects.htm>
<5><Backing up and recovering AIX logical partitions><iphbk/iphbkaixbackup.htm>
<5><Getting fixes><iphbk/iphbkgettingfixes.htm>
<4><Using AIX installed on a logical partitions><iphbk/iphbkaixuse.htm>
<5><Restarting and shutting down AIX in a logical partition><iphbk/iphbkshutdownaix.htm>
<6><Shutting down using the HMC><iphbk/iphbkshutdownhmc.htm>
<6><Restarting AIX logical partitions><iphbk/iphbkrestartaix.htm>
<5><Managing security><iphbk/iphbksecuirtylpar.htm>
<5><Managing performance><iphbk/iphbkperformancelpar.htm>
<4><Troubleshooting><iphbk/iphbkaixtroubleshoot.htm>
<5><Reference codes for logical partitions><iphbl/iphblosrefcode.htm>
<4><Related information><iphbk/iphbkaixrelated.htm>
<2><分割 i5/OS><iphbl/iphbllparos400kickoff.htm>
<3><Partitioning for i5/OS><iphbl/iphbllparos400kickoff.htm>
<4><What's new><iphbl/iphblwhatsnew.htm>
<4><Printable PDFs><iphbl/iphblprintpdfs.htm>
<4><Scenarios><iphbl/iphblscenarioskickoff.htm>
<4><Planning for i5/OS logical partitions><iphbl/iphblplanos400.htm>
<4><Configuring i5/OS logical partitions><iphbl/iphblconfigurelpar.htm>
<5><Creating  logical partitions and partition profiles><iphbl/iphblcreatelpar.htm>
<5><Creating additional partition profiles><iphbl/iphblcreateprofile.htm>
<5><Designating a service partition for your managed system><iphbl/iphblservicepartition.htm>
<5><Creating partitions from the manufacturing default configuration><iphbl/iphbldefaultlpar.htm>
<5><Migrating i5/OS logical partitions><iphbl/iphblmigrateos400.htm>
<5><Copying a partition profile><iphbl/iphblcopyprofile.htm>
<5><Creating a system profile><iphbl/iphblsysprofile.htm>
<5><Copying a system profile><iphbl/iphblcopysysp.htm>
<5><Creating an AIX partition using i5/OS virtual I/O resources><iphbl/iphblaixpartition.htm>
<6><Creating a network server description><iphbl/iphblaixnwsd.htm>
<6><Connecting to the virtual console><iphbl/iphblaixvirtualconsole.htm>
<6><Starting and stopping the NWSD><iphbl/iphblvaryonaix.htm>
<5><Creating a Linux partition using i5/OS virtual I/O resources><iphbl/iphblioserverpartition.htm>
<6><Creating a network server description><iphbl/iphblnwsd.htm>
<6><Connecting to the virtual console><iphbl/iphblvirtualconsole.htm>
<6><Starting and stopping the NWSD><iphbl/iphblvaryon.htm>
<5><Deleting a logical partition><iphbl/iphbldeletelpar.htm>
<5><Resetting the server><iphbl/iphblresetserver.htm>
<4><Managing i5/OS logical partitions><iphbl/iphblmanageos400.htm>
<5><Managing partition profiles><iphbl/iphblmanagepprofile.htm>
<6><Activating a partition profile><iphbl/iphblactivate.htm>
<6><Changing partition profile properties><iphbl/iphblchangeprofile.htm>
<6><Deleting a partition profile><iphbl/iphbldeleteprofile.htm>
<5><Managing system profiles><iphbl/iphblmanagesprofile.htm>
<6><Activating a system profile><iphbl/iphblactivatesysprofile.htm>
<6><Deleting a system profile><iphbl/iphbldeletesysprofile.htm>
<5><Dynamically managing logical partition resources><iphbl/iphblmanageos400movement.htm>
<6><Dynamically managing 5250 CPW><iphbl/iphbldlparinteractive.htm>
<6><Dynamically managing physical I/O devices or slots><iphbl/iphbldlpariop.htm>
<6><Dynamically managing memory><iphbl/iphbldlparmemory.htm>
<6><Dynamically managing processing power><iphbl/iphbldlparprocpower.htm>
<6><Scheduling dynamic resource movement><iphbl/iphblschedulelpar.htm>
<5><Managing partitions remotely><iphbl/iphblpartitionremote.htm>
<5><Installing new hardware for i5/OS logical partitions><iphbl/iphblinstallos400hw.htm>
<5><Managing AIX partitions using i5/OS resources><iphbl/iphblaixmanagingkickoff.htm>
<6><Adding virtual disks to an AIX partition><iphbl/iphbldynamicallyaddingaixdisks.htm>
<6><Managing network server descriptions><iphbl/iphblaixnwsdoverview.htm>
<7><Linking NWSSTG among NSWDs><iphbl/iphblaixlinknwsstg.htm>
<7><Deleting NWSDs><iphbl/iphblaixdeletenwsd.htm>
<7><Deleting virtual disk drives><iphbl/iphblaixdelete.htm>
<6><Using IPL types when running AIX><iphbl/iphblaixbootsource.htm>
<6><Backing up and recovering AIX logical partitions><iphbl/iphblaixrecoverykickoff.htm>
<7><Using the tar command><iphbl/iphblaixsavrstaixtar.htm>
<7><Using i5/OS commands><iphbl/iphblos400commandaix.htm>
<6><Backing up the NSWD and disk drives associated with an AIX partition><iphbl/iphblaixbackup.htm>
<7><Backing up NWSDs for an AIX partition><iphbl/iphblaixbackupnwsd.htm>
<7><Restoring NWSDs for an AIX partition><iphbl/iphblaixrestore.htm>
<7><Unlinking disk drives from an AIX partition><iphbl/iphblaixunlink.htm>
<8><Saving server objects in i5/OS><iphbl/iphblaixobjects.htm>
<5><Managing Linux partitions using i5/OS resources><iphbl/iphblmanagingkickoff.htm>
<6><Adding virtual disks to a Linux partition><iphbl/iphbldynamicallyaddingdisks.htm>
<6><Managing network server description><iphbl/iphblnwsdoverview.htm>
<7><Linking NWSSTG among NSWDs><iphbl/iphbllinknwsstg.htm>
<7><Deleting NWSDs><iphbl/iphbldeletenwsd.htm>
<7><Deleting virtual disk drives><iphbl/iphbldelete.htm>
<6><Using IPL types when running Linux><iphbl/iphblbootsource.htm>
<6><Backing up and recovering Linux logical partitions><iphbl/iphblrecoverykickoff.htm>
<7><Using the tar command><iphbl/iphblsavrstaixtar.htm>
<7><Using i5/OS commands><iphbl/iphblos400command.htm>
<6><Backing up the NWSD and disk drives associated with a Linux partition><iphbl/iphblbackup.htm>
<7><Building a rescue image on an NWSSTG><iphbl/iphblrecoverimage.htm>
<7><Using rescue image from an NWSSTG><iphbl/iphblrecoverysystem.htm>
<7><Backing up NWSDs  for a Linux partition><iphbl/iphblbackupnwsd.htm>
<7><Restoring NWSDs for a Linux partition><iphbl/iphblrestore.htm>
<7><Unlinking disk drives from a Linux partition><iphbl/iphblunlink.htm>
<8><Saving server objects in i5/OS><iphbl/iphblobjects.htm>
<5><Getting fixes><iphbl/iphblgettingfixes.htm>
<4><Using i5/OS installed on a logical partition><iphbl/iphblusingi5os.htm>
<5><Restarting and shutting down i5/OS in a logical partition><iphbl/iphblrestartos400.htm>
<6><Shutting down i5/OS><iphbl/iphblpowerdownos400.htm>
<7><Shutting down using the HMC><iphbl/iphblsdlparhmc.htm>
<7><Shutting down using Operations Console><iphbl/iphblsdlparoc.htm>
<6><Changing operating mode for an i5/OS logical partition><iphbl/iphblos400mode.htm>
<6><Changing the IPL type for an i5/OS logical partition><iphbl/iphblos400iplsource.htm>
<5><Managing security><iphbl/iphblsecuritylpar.htm>
<5><Backing up and recovering i5/OS data><iphbl/iphblos400backupandrecovery.htm>
<5><Performance impacts to i5/OS><iphbl/iphblos400performanceimpacts.htm>
<4><Troubleshooting><iphbl/iphbltroubleshootos400.htm>
<5><Reference codes for  partitions><iphbl/iphblosrefcode.htm>
<5><Troubleshooting errors for AIX partitions><iphbl/iphblaixtroubleshootingkickoff.htm>
<6><Debugging NWSD error messages><iphbl/iphblaixnwsderrors.htm>
<5><Troubleshooting errors for Linux partitions><iphbl/iphbltroubleshootingkickoff.htm>
<6><Debugging NWSD error messages><iphbl/iphblnwsderrors.htm>
<6><Troubleshooting Linux virtual tape><iphbl/iphbltsaixtape.htm>
<5><Situations requiring the assistance of an authorized service provider><iphbl/iphblservicerep.htm>
<6><Performing a main storage dump on i5/OS logical partitions><iphbl/iphblperformsd.htm>
<6><Using remote service with i5/OS logical partitions><iphbl/iphblremoteservice.htm>
<6><Shutting down a power domain with logical partitions><iphbl/iphbldomain.htm>
<6><Resetting a disk unit IOP with i5/OS logical partitions><iphbl/iphblresetunit.htm>
<4><Related information><iphbl/iphbllparrelated.htm>
<2><分割 Linux><iphbi/iphbikickoff.htm>
<3><Partitioning for Linux><iphbi/iphbikickoff.htm>
<4><What's new><iphbi/iphbiwhatnew.htm>
<4><Printable PDFs><iphbi/iphbiprintthis.htm>
<4><Concepts for Linux logical partitions><iphbi/iphbiconcept.htm>
<5><Hardware requirements for Linux logical partitions><iphbi/iphbihardware.htm>
<6><Supported hardware resources><iphbi/iphbidrivers.htm>
<6><Minimum configuration requirements><iphbi/iphbiminimumconfig.htm>
<6><Shared processor support><iphbi/iphbishared.htm>
<6><Console requirements><iphbi/iphbiconsole.htm>
<6><Storage options><iphbi/iphbistorage.htm>
<5><Virtual I/O devices><iphbi/iphbivirtualnative.htm>
<6><Virtual adapters><iphbi/iphbivirtualadapters.htm>
<6><Virtual serial adapters><iphbi/iphbivirtualserial.htm>
<6><Virtual SCSI adapters><iphbi/iphbivirtualscsi.htm>
<5><Communications options><iphbi/iphbinetworking.htm>
<5><Linux distributions><iphbi/iphbipowerlinux.htm>
<4><Scenarios for Linux logical partitions><iphbi/iphbiscenario.htm>
<5><Scenario: Using partition profiles><iphat/iphatscenario1.htm>
<5><Scenario: Using system profiles><iphat/iphatscenario2.htm>
<5><Scenario: Server consolidation><iphbi/iphbiserver.htm>
<5><Scenario: Capacity Upgrade on Demand><iphbi/iphbicuod.htm>
<4><Plan for Linux logical partitions><iphae/linuxpartitions.htm>
<4><Configuring Linux logical partitions><iphbi/iphbiconfig.htm>
<5><Creating a logical partition><iphbl/iphblcreatelpar.htm>
<5><Creating a partition profile><iphbl/iphblcreateprofile.htm>
<5><Migrating Linux logical partitions><iphbi/iphbimigration.htm>
<6><Migrating a Linux installation from iSeries to IBM eServer i5><iphbi/iphbimigratiseries.htm>
<6><Migrating a Linux installation from pSeries to IBM eServer p5><iphbi/iphbimigratpseries.htm>
<5><Copying a partition profile><iphbl/iphblcopyprofile.htm>
<5><Creating a system profile><iphbl/iphblsysprofile.htm>
<5><Copying a system profile><iphbl/iphblcopysysp.htm>
<5><Creating a logical partition using the i5/OS integrated virtual I/O server><iphbl/iphblioserverpartition.htm>
<4><Managing Linux logical partitions><iphbi/iphbimanage.htm>
<5><Managing partition profiles><iphbl/iphblmanagepprofile.htm>
<6><Activating a partition profile><iphbl/iphblactivate.htm>
<6><Deleting a partition profile><iphbi/iphbldeleteprofile.htm>
<5><Managing system profiles><iphbl/iphblmanagesprofile.htm>
<6><Activating a system profile><iphbl/iphblactivatesysprofile.htm>
<6><Deleting a system profile><iphbl/iphbldeletesysprofile.htm>
<5><Dynamically managing logical partition resources><iphbi/iphbilinuxmanagedynamic.htm>
<6><Dynamically managing physical I/O devices><iphbi/iphbilinuxdlpario.htm>
<6><Dynamically managing processing power><iphbi/iphbilinuxdlparprocpower.htm>
<5><Managing partitions remotely><iphbl/iphblpartitionremote.htm>
<5><Managing logical partition and operating system security><iphbl/iphblsecuritylpar.htm>
<5><Application support><iphbi/iphbiappsupport.htm>
<6><Samba support with i5/OS Netserver><iphbi/iphbinetserver.htm>
<6><Accessing i5/OS data using the Linux ODBC driver><iphbi/iphbiodbc.htm>
<5><Backing up and recovering Linux installations><iphbi/iphbibackup.htm>
<6><Managing logical partitions that use the i5/OS integrated virtual I/O server><iphbl/iphblmanagingkickoff.htm>
<6><Backing up and recovering Linux on pSeries><iphbi/iphbibackuppseries.htm>
<4><Using Linux installed on a logical partition><iphbi/iphbilinuxuse.htm>
<5><Restarting and shutting down Linux in a logical partition><iphbi/iphbishutdownlinux.htm>
<6><Restarting Linux logical partitions><iphbi/iphbirestartlinux.htm>
<6><Shutting down using the HMC><iphbi/iphbishutdownhmc.htm>
<4><Troubleshooting Linux logical partitions><iphbi/iphbitrouble.htm>
<4><Related information for Linux logical partitions><iphbi/iphbirelated.htm>
<2><使用虛擬 I/O 伺服器><iphb1/iphb1kickoff.htm>
<3><Printable PDF><iphb1/iphb1_vios_printthis.htm>
<3><Concepts for the Virtual I/O Server><iphb1/iphb1_vios_concepts.htm>
<4><Command line interface><iphb1/iphb1_vios_concepts_cli.htm>
<4><User types><iphb1/iphb1_vios_concepts_user.htm>
<4><Virtual networking><iphb1/iphb1_vios_concepts_network.htm>
<5><Link aggregation><iphb1/iphb1_vios_concepts_network_lnagg.htm>
<5><Virtual local area networks (VLAN)><iphb1/iphb1_vios_concepts_network_vlan.htm>
<5><Virtual Ethernet adapters><iphb1/iphb1_vios_concepts_network_venet.htm>
<5><Shared Ethernet adapter><iphb1/iphb1_vios_concepts_network_sea.htm>
<4><Virtual SCSI><iphb1/iphb1_vios_concepts_stor.htm>
<5><Virtual SCSI device types><iphb1/iphb1_vios_concepts_stor_types.htm>
<5><Logical volume storage overview><iphb1/iphb1_vios_concepts_stor_lvovw.htm>
<5><Physical volumes><iphb1/iphb1_vios_concepts_stor_pv.htm>
<5><Volume groups><iphb1/iphb1_vios_concepts_stor_vg.htm>
<5><Physical partitions><iphb1/iphb1_vios_concepts_stor_pp.htm>
<5><Logical partitions><iphb1/iphb1_vios_concepts_stor_lp.htm>
<5><Quorums><iphb1/iphb1_vios_concepts_stor_quorum.htm>
<3><Planning for the Virtual I/O Server><iphb1/iphb1_vios_planning.htm>
<4><Capacity planning><iphb1/iphb1_vios_planning_cap.htm>
<4><High availability><iphb1/iphb1_vios_planning_ha.htm>
<5><Client partitions><iphb1/iphb1_vios_planning_ha_client.htm>
<5><Virtual I/O Server partition><iphb1/iphb1_vios_planning_ha_server.htm>
<4><Security><iphb1/iphb1_vios_planning_sec.htm>
<4><Restrictions><iphb1/iphb1_vios_planning_res.htm>
<3><Configuring the Virtual I/O Server><iphb1/iphb1_vios_configuring.htm>
<4><Inputting the Virtual I/O Server activation code><iphb1/iphb1_vios_configuration_inputcode.htm>
<4><Creating logical partitions and partition profiles><iphb1/iphb1_vios_configuring_partition.htm>
<4><Installing the Virtual I/O Server><iphb1/iphb1_vios_configuring_install.htm>
<5><Installing the I/O Server from CD><iphb1/iphb1_vios_configuring_installcd.htm>
<5><Installing the I/O Server from the HMC><iphb1/iphb1_vios_configuring_installhmc.htm>
<4><Configuring virtual SCSI><iphb1/iphb1_vios_configuring_vscsi.htm>
<4><Configuring shared Ethernet adapter><iphb1/iphb1_vios_configuring_sea.htm>
<3><Managing the Virtual I/O Server><iphb1/iphb1_vios_managing.htm>
<4><Managing user types on the Virtual I/O Server><iphb1/iphb1_vios_managing_users.htm>
<4><Managing shared Ethernet adapters><iphb1/iphb1_vios_managing_sea.htm>
<5><Configuring Link Aggregation><iphb1/iphb1_vios_managing_lnagg.htm>
<5><Network attributes><iphb1/iphb1_vios_managing_sea_attr.htm>
<4><Managing virtual SCSI><iphb1/iphb1_vios_managing_vscsi.htm>
<5><Creating virtual target device><iphb1/iphb1_vios_managing_vscsi_targ.htm>
<5><Creating logical volumes and volume groups><iphb1/iphb1_vios_managing_vscsi_vg.htm>
<4><Maintaining the Virtual I/O Server><iphb1/iphb1_vios_managing_maintain.htm>
<5><Importing or exporting a volume group><iphb1/iphb1_vios_managing_vscsi_impexp.htm>
<5><Updating the Virtual I/O Server><iphb1/iphb1_vios_managing_updating.htm>
<5><Backing up and restoring the Virtual I/O Server><iphb1/iphb1_vios_backup.htm>
<6><Backing up><iphb1/iphb1_vios_backup_backup.htm>
<7><Backing up to tape><iphb1/iphb1_vios_backup_tape.htm>
<7><Backing up to remote file system><iphb1/iphb1_vios_backup_filesystem.htm>
<7><Backing up to CD or DVD><iphb1/iphb1_vios_backup_cddvd.htm>
<6><Restoring><iphb1/iphb1_vios_backup_restore.htm>
<7><Restoring from tape><iphb1/iphb1_vios_backup_restore_tape.htm>
<7><Restoring from remote file system><iphb1/iphb1_vios_backup_restore_file.htm>
<7><Restoring from CD or DVD><iphb1/iphb1_vios_backup_restore_cddvd.htm>
<5><Monitoring the Virtual I/O Server><iphb1/iphb1_vios_managing_maintain_monitor.htm>
<3><Troubleshooting the Virtual I/O Server><iphb1/iphb1_vios_troubleshooting.htm>
<4><Virtual I/O Server problems><iphb1/iphb1_vios_troubleshooting_serv.htm>
<5><Virtual SCSI problems><iphb1/iphb1_vios_troubleshooting_serv_vscsi.htm>
<5><Networking problems><iphb1/iphb1_vios_troubleshooting_network.htm>
<4><Client partition problems><iphb1/iphb1_vios_troubleshooting_client.htm>
<3><Related Information><iphb1/iphb1_vios_related.htm>
<2><相關資訊><iphat/iphatlparrelated.htm>
<1><安裝作業系統><iphaw/kickoff.htm>
<2><安裝 AIX><iphay/iphayinstallaix.htm>
<2><安裝 i5/OS><iphax/iphaxinstallos400.htm>
<2><安裝 Linux><iphaz/iphazinstalllinux.htm>
<1><Managing your server><ipha1/kick.htm>
<2><Hardware Management Console><ipha1/hardwaremanagementconsolehmc.htm>
<3><Printable PDFs><ipha1/printablepdf.htm>
<3><HMC concepts><ipha1/concepts.htm>
<4><HMC graphical user interface><ipha1/hmcgraphicaluserinterface.htm>
<5><Navigation area><ipha1/navigationarea.htm>
<5><Contents area><ipha1/contentsarea.htm>
<5><Menu bar><ipha1/menubar.htm>
<5><Toolbar><ipha1/toolbar.htm>
<5><Status bar><ipha1/statusbar.htm>
<5><HMC applications><ipha1/hmcapps.htm>
<4><HMC access control><ipha1/managingusers.htm>
<5><Managed resource roles><ipha1/resourcemanagement.htm>
<5><Task roles><ipha1/taskmanagement.htm>
<4><Overview of HMC roles><ipha1/overviewofroles.htm>
<5><Predefined HMC roles><ipha1/predefinedroles.htm>
<5><Customized HMC roles><ipha1/defcustomrole.htm>
<4><Overview of HMC tasks><ipha1/overviewoftasksandroles.htm>
<5><HMC configuration tasks><ipha1/syscon.htm>
<5><HMC user management tasks><ipha1/uman.htm>
<5><Managed system profile tasks><ipha1/sysprof.htm>
<5><Managed system tasks><ipha1/mansys.htm>
<5><Logical partition tasks><ipha1/partitiontasks.htm>
<5><Capacity on Demand tasks><ipha1/cuodtasks.htm>
<5><Virtualization Engine Technologies tasks><ipha1/vetasks.htm>
<5><Service tasks><ipha1/problemdetermination.htm>
<4><Managed system power-on modes><ipha1/poweronmodes.htm>
<4><Managed system power-on states><ipha1/poweronstates.htm>
<4><Types of HMC network connections><ipha1/netconhmc.htm>
<5><Connecting the HMC to a network><ipha1/connectingthehmctoanetwork.htm>
<5><Private and open networks in the HMC environment><ipha1/privpubnetwork.htm>
<5><Using the HMC as a DHCP server><ipha1/hmcdhcpserver.htm>
<3><Working with the HMC><ipha1/workingwiththehmc.htm>
<4><Logging in, shutting down, rebooting, and logging off the HMC><ipha1/shutdownrestartlogout.htm>
<5><Logging in to the HMC><ipha1/poweron.htm>
<5><Shutting down, rebooting, and logging off the HMC><ipha1/reboot.htm>
<4><Configuring the HMC management environment><ipha1/configuringyourhmcmanagementenvironment.htm>
<5><Testing network connectivity><ipha1/testingnetworkconnectivity.htm>
<5><Installing and using the remote client><ipha1/usingtheremoteclient.htm>
<5><Working with the HMC machine code><ipha1/scndupgrd.htm>
<5><Changing the HMC interface language><ipha1/changingtheinterfacelanguage.htm>
<5><Configuring the keyboard layout><ipha1/configkeyboardlayout.htm>
<5><Using the HMC remote command line><ipha1/usingtheremotecommandline.htm>
<6><Viewing HMC remote command information><ipha1/viewingremcom.htm>
<6><Setting up secure script execution between SSH clients and the HMC><ipha1/settingupsecurescriptexecutionsbetweensshclientsandthehmc.htm>
<6><Enabling and disabling HMC remote commands><ipha1/enablinganddisablingremotecommands.htm>
<4><Viewing recent HMC activity><ipha1/viewingrecenthmcactivity.htm>
<4><Managing partition profile information><ipha1/backingupandrestoringprofileinformation.htm>
<5><Backing up profile data><ipha1/backupprofdata.htm>
<5><Initializing profile data><ipha1/initializeprofdata.htm>
<5><Restoring profile data><ipha1/restoreprofdata.htm>
<5><Removing profile data><ipha1/removeprofdata.htm>
<4><Backing up and restoring the HMC><ipha1/backingupthehmc.htm>
<5><Backing up critical HMC data><ipha1/backingupcriticalconsoledata.htm>
<5><Restoring critical HMC data><ipha1/restoringcriticalconsoledata.htm>
<6><Restoring from DVD><ipha1/restoredvd.htm>
<6><Restoring from a remote server><ipha1/restoreremotesys.htm>
<5><Scheduling and reviewing scheduled HMC backups><ipha1/schedulingandreviewingscheduledbackups.htm>
<5><Saving HMC upgrade data><ipha1/savingupgradedata.htm>
<5><Reinstalling the HMC machine code><ipha1/recoveringthehmc.htm>
<4><Managing security on the HMC><ipha1/managingsecurityonyourhmc.htm>
<5><Creating a user><ipha1/creatingusers.htm>
<5><Creating a customized HMC role><ipha1/customroles.htm>
<5><Editing user information and roles><ipha1/editinguserinformationandroles.htm>
<5><Copying user information><ipha1/copyingusers.htm>
<5><Viewing a user description><ipha1/viewinguserdefinitions.htm>
<5><Deleting a user><ipha1/deletingauser.htm>
<5><Changing HMC user passwords><ipha1/changingpasswords.htm>
<5><Changing the managed system's password><ipha1/updatepassword.htm>
<3><Working with managed systems using the HMC><ipha1/workingwithmanagedsystemsusingyourhmc.htm>
<4><Powering on and off the managed system><ipha1/poweringonandoffyourmanagedsystem.htm>
<5><Powering on the managed system><ipha1/poweringonthemanagedsystem.htm>
<5><Powering off the managed system><ipha1/poweringoffthemanagedsystem.htm>
<5><Scheduling power-on and power-off operations for the managed system><ipha1/poweringonandoffyourmanagedsystem.htm>
<4><Accessing the managed system><ipha1/accessingyourmanagedsystem.htm>
<5><Overview of passwords><ipha1/overviewofthepasswords.htm>
<5><Virtual operating system consoles><ipha1/virtualoperatingsystemconsoles.htm>
<6><Verify that consoles are configured><ipha1/checktoseeifconsolesareconfigured.htm>
<6><5250 console><ipha1/fiftytwofifty.htm>
<7><Preparing the logical partition to connect><ipha1/setupconfig5250.htm>
<7><Connecting to a 5250 console><ipha1/connecting5250.htm>
<8><Connecting to a 5250 console locally><ipha1/local5250.htm>
<8><Connecting to a 5250 console remotely><ipha1/remote5250.htm>
<6><Virtual terminal><ipha1/virtualterminal.htm>
<5><Control panel functions><ipha1/virtualcontrolpanel.htm>
<4><Finding data about the managed systems><ipha1/findingdataaboutyourmanagedsystems.htm>
<5><Viewing information about a managed system><ipha1/viewinginformationaboutamanagedsystem.htm>
<5><Updating managed system information><ipha1/updatingmanagedsysteminformationdisplayedinthecontentsarea.htm>
<5><Deleting the managed system><ipha1/deletingthemanagedsystemfromthecontentsarea.htm>
<5><Disconnecting another HMC connection><ipha1/releasinganhmclockonamanagedsystem.htm>
<4><Recovering partition data on a managed system><ipha1/recoverpartitiondata.htm>
<4><Managing operating systems><ipha1/managingresourcesonamanagedsystem.htm>
<5><Resetting the operating system on a partition><ipha1/resetoslpar.htm>
<5><Shutting down an operating system><ipha1/shutdownos.htm>
<4><Adding managed systems to the HMC environment><ipha1/addingmanagedsystems.htm>
<4><Extending an existing network><ipha1/usingexisting.htm>
<5><Using an existing private network with the HMC acting as a DHCP server><ipha1/usinganexisting.htm>
<5><Using an existing open network><ipha1/usinganexistingopen.htm>
<4><Servicing the managed system><ipha1/servicingyourmanagedsystem.htm>
<3><Related information><ipha1/relatedinformation.htm>
<2><Advanced System Management Interface><iphbp/kickoff.htm>
<3><Printable PDF><iphbp/printablepdf.htm>
<3><Concepts><iphbp/genconcepts.htm>
<4><ASMI requirements><iphbp/requirements.htm>
<4><ASMI authority levels><iphbp/asmiauthority.htm>
<4><ASMI login restrictions><iphbp/asmilogin.htm>
<3><Setting up login profile><iphbp/loginprofile.htm>
<4><Changing password><iphbp/chgpwd.htm>
<4><Retrieving login audits><iphbp/loginaudit.htm>
<4><Changing default language><iphbp/defaultlang.htm>
<3><Viewing system information><iphbp/viewsysinfo.htm>
<4><Viewing vital product data><iphbp/viewvpd.htm>
<4><Viewing persistent storage><iphbp/viewpersistent.htm>
<4><Viewing system power control network trace><iphbp/viewsyspctrace.htm>
<4><Viewing progress indicator from previous boot><iphbp/lastsysboot.htm>
<4><Viewing progress indicator history><iphbp/viewsystrace.htm>
<3><Controlling the system power><iphbp/usingsyspc.htm>
<4><Powering the system on and off><iphbp/poweronoff.htm>
<4><Setting auto-power restart><iphbp/autopower.htm>
<4><Performing an immediate power off><iphbp/fastoff.htm>
<4><Performing a system reboot><iphbp/sysreboot.htm>
<4><Setting wake-on LAN><iphbp/remotepower.htm>
<3><Changing system configuration><iphbp/viewsysconfig.htm>
<4><Changing system name><iphbp/systemname.htm>
<4><Changing the processing unit identifier><iphbp/viewcec.htm>
<4><Configuring I/O enclosures><iphbp/configio.htm>
<4><Changing time of day><iphbp/viewtime.htm>
<4><Changing firmware update policy><iphbp/codesource.htm>
<4><Enabling PCI error injection policy><iphbp/pcierrorinject.htm>
<4><Configuring monitoring><iphbp/confmonitor.htm>
<4><Changing the interposer plug count><iphbp/interplugcount.htm>
<4><Changing the number of HSL Opticonnect Connections><iphbp/hslconnect.htm>
<4><Deconfiguring hardware><iphbp/hardwaredeconfig.htm>
<5><Setting deconfiguration policies><iphbp/viewdeconfig.htm>
<5><Changing processor configuration><iphbp/viewprocconfig.htm>
<5><Changing memory configuration><iphbp/viewmemconfig.htm>
<5><Clearing all deconfiguration errors><iphbp/cleardeconfig.htm>
<4><Programming vital product data><iphbp/programvpd.htm>
<5><Setting the system brand><iphbp/systembrand.htm>
<5><Setting the system identifiers><iphbp/systemkeywords.htm>
<5><Setting the system enclosure type><iphbp/systemenclosures.htm>
<4><Changing service indicators><iphbp/serviceindicators.htm>
<5><Turning off system attention indicator><iphbp/sysattn.htm>
<5><Enabling enclosure indicators><iphbp/enclosureindicators.htm>
<5><Changing indicators by location code><iphbp/viewbylocation.htm>
<5><Performing an LED test on the control panel><iphbp/lamptest.htm>
<3><Configuring network services><iphbp/networkservices.htm>
<4><Configuring network interfaces><iphbp/networkconfig.htm>
<4><Configuring network access><iphbp/networkaccess.htm>
<4><Debugging virtual TTY><iphbp/debugvirtualtty.htm>
<3><Using on-demand utilities><iphbp/ondemandutil.htm>
<4><Order Capacity on Demand><iphbp/cuodinfo.htm>
<4><Activate Capacity on Demand><iphbp/cuodactivation.htm>
<4><Resume server firmware after CoD activation><iphbp/cuodrecovery.htm>
<4><Use Capacity on Demand commands><iphbp/cuodcmd.htm>
<3><Using concurrent maintenance utilities><iphbp/concurrentmaint.htm>
<4><Controlling power to IDE devices><iphbp/viewidectrl.htm>
<4><Preparing the operator panel><iphbp/opanelmaint.htm>
<3><Troubleshooting the system using service aids><iphbp/usingsysservaid.htm>
<4><Displaying error and event logs><iphbp/displayerrlog.htm>
<4><Enabling serial port snoop><iphbp/usingsysservaid.htm>
<4><Initiating a platform dump><iphbp/platformdump.htm>
<4><Initiating a service processor dump><iphbp/spdump.htm>
<4><Configuring a serial port setup><iphbp/serialportsetup.htm>
<4><Configuring your modem><iphbp/configmodem.htm>
<4><Configuring call-home and call-in policy><iphbp/callhomesetup.htm>
<4><Testing the call-home policy><iphbp/callhometest.htm>
<4><Rebooting the service processor><iphbp/rebootfsp.htm>
<4><Restoring your server to factory settings><iphbp/factorysettings.htm>
<2><Operations Console><ipha1/opsconsole.htm>
<2><Twinaxial console><iphbn/kickoff.htm>
<1><Working with Capacity on Demand><ipha2/kickoff.htm>
<2><What's new><ipha2/whatnew.htm>
<2><Printable PDFs><ipha2/print.htm>
<2><Preparing for Capacity on Demand><ipha2/codprep.htm>
<3><Planning for Capacity on Demand><ipha2/cuodplancapacity.htm>
<3><Determining when to activate resources><ipha2/cuodplannumprocs.htm>
<3><Setting up your environment for CoD><ipha2/cuodplansetup.htm>
<3><Software licensing considerations><ipha2/cuodconswlic.htm>
<2><Working with Capacity Upgrade on Demand><ipha2/cuod.htm>
<3><Concepts><ipha2/cuodconparent.htm>
<4><Processors and memory units><ipha2/cuodconproc.htm>
<4><Activation codes><ipha2/cuodconpodact.htm>
<3><Ordering Capacity Upgrade on Demand activation features><ipha2/cuodorder.htm>
<3><Using Capacity Upgrade on Demand><ipha2/cuoduse.htm>
<4><Activating resources permanently><ipha2/cuodactpermcap.htm>
<4><Viewing settings for CoD resources><ipha2/cuoddisplayresources.htm>
<4><Viewing and saving CoD code generation information><ipha2/cuodviewsave.htm>
<2><Working with Trial Capacity on Demand><ipha2/tcod.htm>
<3><Starting Trial Capacity on Demand><ipha2/tcodorder.htm>
<3><Viewing settings for CoD resources><ipha2/tcoddisplayresources.htm>
<3><Viewing and saving CoD code generation information><ipha2/tcodviewsave.htm>
<3><Stopping Trial Capacity on Demand><ipha2/tcodend.htm>
<2><Working with On/Off Capacity on Demand><ipha2/oocod.htm>
<3><Concepts><ipha2/onoffcodconcepts.htm>
<4><Processor or memory days><ipha2/onoffcodconprocdays.htm>
<4><On/Off CoD enablement code><ipha2/onoffcodconenable.htm>
<4><Billing for On/Off Capacity on Demand><ipha2/onoffcodconbill.htm>
<3><Enabling On/Off Capacity on Demand><ipha2/onoffcodenable.htm>
<4><Obtaining and entering your On/Off CoD enablement code><ipha2/onoffcodenableobtain.htm>
<4><Establishing monthly reporting to IBM><ipha2/onoffcodenablereport.htm>
<3><Using On/Off Capacity on Demand><ipha2/onoffcoduse.htm>
<4><Activating resources temporarily on your server><ipha2/onoffcodenablerequest.htm>
<4><Viewing settings for CoD resources><ipha2/onoffcodusedisplay.htm>
<4><Viewing and saving CoD information><ipha2/onoffcoduseviewinfo.htm>
<4><Stopping an On/Off CoD request><ipha2/onoffcodusestoprequest.htm>
<4><Discontinuing On/Off Capacity on Demand><ipha2/onoffcodend.htm>
<2><Working with Reserve Capacity on Demand><ipha2/rcod.htm>
<3><Concepts><ipha2/reservecodconcepts.htm>
<4><Processor days><ipha2/reservecodconprocdays.htm>
<4><Reserve capacity prepaid feature and reserve capacity prepaid code><ipha2/reservecodconenable.htm>
<3><Enabling Reserve Capacity on Demand><ipha2/reservecodenable.htm>
<3><Using Reserve Capacity on Demand><ipha2/reservecoduse.htm>
<4><Viewing settings for Reserve CoD processors><ipha2/reservecodusedisplay.htm>
<4><Viewing shared processor information><ipha2/reservecodusesharedprocpool.htm>
<2><Related information><ipha2/relatedinfo.htm>
<1><Troubleshooting><ipha3/kickoff.htm>
<2><What's new><ipha3/whatsnew.htm>
<2><Printable PDF><ipha3/printablepdf.htm>
<2><Managing problems><ipha3/howservermanages.htm>
<2><Detecting problems><ipha3/detecting.htm>
<3><Attention lights overview><ipha3/attention_lights.htm>
<3><Messages overview><ipha3/messages_overview.htm>
<3><Reference codes overview><ipha3/reference_codes_overview.htm>
<2><Analyzing and handling problems><ipha3/analyzing.htm>
<3><Beginning problem analysis><ipha3/begin_pa.htm>
<4><AIX problem analysis><ipha3/aix_problem_analysis.htm>
<4><i5/OS problem analysis><ipha3/os400_problem_analysis.htm>
<4><Linux problem analysis><ipha3/linux_problem_analysis.htm>
<3><Collecting codes><ipha3/collectsrc.htm>
<3><Reference codes list><ipha3/referencecodes.htm>
<4><HMC error codes><ipha3/hmc_codes.htm>
<5><0xxxxx><ipha3/hmc_codes_0.htm>
<5><HSCE xxxx><ipha3/hmc_codes_hsce.htm>
<5><HSCI xxxx><ipha3/hmc_codes_hsci.htm>
<5><HSCL xxxx><ipha3/hmc_codes_hscl.htm>
<5><HSCP xxxx><ipha3/hmc_codes_hscp.htm>
<5><HSCS xxxx><ipha3/hmc_codes_hscs.htm>
<4><SRN codes><ipha3/srn_codes.htm>
<3><Supporting diagnostics><ipha3/diagnostic_tools.htm>
<4><Online and standalone diagnostics><ipha3/aix_diagnostics.htm>
<5><Online diagnostics><ipha3/online_procedure.htm>
<5><Standalone diagnostics from CD><ipha3/standalone_procedure.htm>
<5><Standalone diagnostics from a NIM server><ipha3/standalone_nim.htm>
<4><Performing a slow boot><ipha3/slow_boot.htm>
<4><Performing dumps><ipha3/mainstoragedump.htm>
<5><Platform and SP dumps><ipha3/platform_dump.htm>
<5><i5/OS main storage dumps><ipha3/main_dump.htm>
<5><Managing dumps><ipha3/manage_dumps.htm>
<6><Copying a dump><ipha3/copy_platform.htm>
<6><Reporting a dump><ipha3/report_msd.htm>
<6><Deleting a dump><ipha3/delete_msd.htm>
<4><End-of-service procedure><ipha3/endofservice.htm>
<4><Correcting the managed system state><ipha3/managedsystemstates.htm>
<4><Recovering partition data on a managed system><ipha3/recover_managed.htm>
<4><Resetting the service processor><ipha3/reset_sp.htm>
<4><Resetting the managed system connection from the HMC><ipha3/reset_connection.htm>
<4><Checking for an IP conflict><ipha3/ip_conflict.htm>
<3><Viewing messages><ipha3/view_messages.htm>
<4><AIX messages><ipha3/view_aix_mess.htm>
<4><HMC messages><ipha3/view_hmc_messages.htm>
<4><i5/OS messages><ipha3/view_os400_mess.htm>
<4><Linux messages><ipha3/view_linux_messages.htm>
<3><Using Service Focal Point><ipha3/sfp.htm>
<4><Viewing serviceable events><ipha3/viewevents.htm>
<4><Closing serviceable events><ipha3/closeevent.htm>
<4><Repairing serviceable events><ipha3/repairevent.htm>
<5><Viewing serviceable event partition information><ipha3/vieweventpartition.htm>
<4><Activating and deactivating LEDs><ipha3/fru_leds.htm>
<4><Setting up connection monitoring><ipha3/setup.htm>
<3><Replacing and verifying parts><ipha3/verifying_the_repair.htm>
<2><Reporting problems><ipha3/reporting.htm>
<3><Problem reporting forms><ipha3/problem_forms.htm>
<3><Contacting IBM support><ipha3/contacting_support.htm>
<2><Related information><ipha3/related.htm>
<1><服務與支援><ipha5/kickoff.htm>
<2><客戶服務與支援><ipha5/customersvcsupport.htm>
<3><新功能介紹><ipha5/whatnew.htm>
<3><可列印的 PDF><ipha5/printablepdf.htm>
<3><概觀><ipha5/overview.htm>
<4><服務環境的元素><ipha5/elements.htm>
<5><連線功能><ipha5/connectivity.htm>
<5><服務資訊><ipha5/inventory.htm>
<5><電子問題報告><ipha5/electronicpbmreport.htm>
<5><修訂程式><ipha5/introfixes.htm>
<5><遠端支援><ipha5/introremotesupport.htm>
<4><服務應用程式簡介><ipha5/intro2.htm>
<5><「電子服務代理程式」><ipha5/electronicserviceagent.htm>
<5><遠端支援機能><ipha5/remotesupportfacility.htm>
<5><服務焦點><ipha5/servicefocalpoint.htm>
<4><服務應用程式與功能的對映><ipha5/mapsvcappsfunc.htm>
<3><實務範例><ipha5/scenarios.htm>
<4><實務範例：AIX><ipha5/aixscenarios.htm>
<5><實務範例：具有 HMC 的多重 AIX 邏輯分割區><ipha5/aixmultiple.htm>
<5><實務範例：不利用 HMC 執行 AIX 的多重伺服器><ipha5/aixwohmc.htm>
<4><實務範例：i5/OS><ipha5/os400scenarios.htm>
<5><實務範例：i5/OS 分割區上使用虛擬專用網路 (VPN) 的多重 i5/OS 分割區><ipha5/os400multiplevpn.htm>
<5><實務範例：使用 HMC 數據機的多重 i5/OS 分割區><ipha5/os400multiplehmc.htm>
<5><實務範例：i5/OS 邏輯分割區上使用數據機的多重 i5/OS 邏輯分割區><ipha5/os400multiplemodemonpartition.htm>
<5><實務範例：i5/OS 不具使用虛擬專用網路 (VPN) 的 HMC><ipha5/os400wohmc.htm>
<4><實務範例：Linux><ipha5/linuxscenarios.htm>
<5><實務範例：沒有 HMC 的 Linux><ipha5/linuxwohmc.htm>
<3><設定服務環境><ipha5/settingup.htm>
<4><使用「引導式設定」精靈來設定您的 HMC><ipha5/useguidedsetup.htm>
<4><服務環境的網路功能><ipha5/networking.htm>
<4><設定 HMC 以連接到服務提供者><ipha5/setuphmcconnect.htm>
<5><選擇連線方法><ipha5/choosemethod.htm>
<5><指定公司的聯絡人與帳戶資訊><ipha5/contactnconnect.htm>
<5><指定連線監視的選項><ipha5/lanoption.htm>
<5><在 HMC 上配置「電子服務代理程式」><ipha5/configesa.htm>
<6><指定 ESA 傳送資訊的時間與頻率><ipha5/whennhowesa.htm>
<6><設定服務事件通知><ipha5/notificationsvcevents.htm>
<6><從網際網路檢視系統資訊><ipha5/viewinfoesa.htm>
<4><設定伺服器以連接到服務提供者><ipha5/setupsvrtoconnect.htm>
<5><設定 AIX 以連接到服務提供者><ipha5/setupaixpartition.htm>
<5><設定 i5/OS 以連接到服務提供者><ipha5/setupos400partition.htm>
<6><設定 i5/OS 以使用虛擬專用網路 (VPN) 連接><ipha5/os400connectvpn.htm>
<6><設定 i5/OS 以使用伺服器上的數據機連接><ipha5/os400connectmodem.htm>
<6><設定 i5/OS 以透過 HMC 連接><ipha5/os400connecthmc.htm>
<5><設定 Linux 以連接到服務提供者><ipha5/setuplinuxpartition.htm>
<5><設定服務處理器以連接到服務提供者><ipha5/serviceprocessorconnect.htm>
<4><測試連線><ipha5/testingconnection.htm>
<3><自訂您的服務設定值><ipha5/customizing.htm>
<4><指定您傳送資訊的時間與頻率><ipha5/whennhowesa.htm>
<4><設定服務事件通知><ipha5/notificationsvcevents.htm>
<4><從網際網路檢視系統資訊><ipha5/viewinfoesa.htm>
<4><指定連線監視的選項><ipha5/lanoption.htm>
<3><報告問題><ipha5/reporting.htm>
<4><無法使用 HMC 時報告問題><ipha5/reporthmcdown.htm>
<4><伺服器當機時報告問題><ipha5/reportserverdown.htm>
<3><取得修訂程式><ipha5/fixes.htm>
<4><HMC 修訂程式><ipha5/fixeshmc.htm>
<4><伺服器韌體修訂程式><ipha5/fixesserverfirmware.htm>
<5><概念及術語><ipha5/fixfirmwareconcepts.htm>
<5><實務範例：伺服器韌體><ipha5/fixfirmwarescenarios.htm>
<6><實務範例：利用 HMC 取得韌體修訂程式><ipha5/fixfirmscenhmc.htm>
<6><實務範例：不利用 HMC 取得韌體修訂程式><ipha5/fixfirmscennohmc.htm>
<6><實務範例：透過 HMC 受管理系統的 OS/400 取得韌體修訂程式><ipha5/fixfirmscenhmcopsys.htm>
<5><管理韌體修訂程式><ipha5/fixfirmwaremanage.htm>
<6><檢視現有的韌體層次><ipha5/viewexistlevel.htm>
<6><檢視可用的韌體層次><ipha5/viewavaillevels.htm>
<6><檢視韌體修訂程式說明函><ipha5/viewfixcoverletter.htm>
<6><取得特定的韌體修訂程式><ipha5/getspecificfix.htm>
<6><永久安裝伺服器韌體修訂程式><ipha5/install_fix_permanently.htm>
<6><移除目前的韌體層次><ipha5/removecurrentlevel.htm>
<6><升級為新韌體版次><ipha5/upgrade_to_new_ga.htm>
<4><作業系統修訂程式><ipha5/fixesoperatingsystems.htm>
<3><啟用遠端支援><ipha5/remotesupport.htm>
<4><遠端支援方法><ipha5/remotesupportmethods.htm>
<4><啟用 HMC 的遠端支援><ipha5/enableremotesupporthmc.htm>
<4><啟用沒有 HMC 的遠端支援><ipha5/enableremotesupportwohmc.htm>
<3><相關資訊><ipha5/related.htm>
<2><服務提供者資訊><iphau/kickoff.htm>
<3><Service provider information><iphau/kickoff.htm>
<4><What's new><iphau/whatsnew.htm>
<4><Printable PDF><iphau/printing.htm>
<4><Start of call procedure><iphau/starthere.htm>
<5><Symptom index><iphau/symptomlist.htm>
<4><Detecting problems><iphau/detecting.htm>
<5><i5/OS problem determination><iphau/probdeterminationos400.htm>
<6><Using the Service Action Log (SAL)><iphau/usingsal.htm>
<6><Using the Product Activity Log (PAL)><iphau/usingpal.htm>
<6><Using the problem log><iphau/usingproblog.htm>
<5><AIX problem determination><iphau/probdetermination.htm>
<5><Linux problem determination><iphau/probdeterminationlinux.htm>
<5><System unit problem determination><iphau/sysunitprobdetermination.htm>
<5><HMC machine code problem determination><iphau/hmcsoftprobdet.htm>
<4><Analyzing problems><iphau/analyzing.htm>
<5><Problems with loading and starting the operating system (AIX and Linux)><iphau/bootprb.htm>
<5><Problems with noncritical resources><iphau/noncritical.htm>
<5><Intermittent problems><iphau/intermittent.htm>
<6><About intermittent problems><iphau/imitabout.htm>
<6><General intermittent problem checklist><iphau/imitchecklist.htm>
<6><Analyzing intermittent problems><iphau/imitanalyzing.htm>
<6><Intermittent symptoms><iphau/imitsymptoms.htm>
<6><Failing area intermittent isolation procedures><iphau/imitintpips.htm>
<5><IPL problems><iphau/iplprob.htm>
<6><Cannot perform IPL from the control panel (no reference code)><iphau/noiplcontrolpanel.htm>
<6><Cannot perform IPL at a specified time (no reference code)><iphau/noiplspectime.htm>
<6><Cannot automatically perform IPL after a power failure><iphau/noiplpowerfail.htm>
<5><Power problems><iphau/powerprob.htm>
<6><Cannot power on system unit (no reference code)><iphau/pwrpsystemon.htm>
<6><Cannot power on I/O expansion unit (no reference code)><iphau/pwrpsecondaryon.htm>
<6><Cannot power off system or I/O expansion unit><iphau/pwrpoff.htm>
<4><Reference codes><ipha6/kickoff.htm>
<5><List of system reference codes><ipha6/refcodelist.htm>
<5><Using system reference codes><ipha6/usingsrcs.htm>
<5><List of service request numbers><ipha6/srnsmain.htm>
<5><Using service request numbers><ipha6/srnsusing.htm>
<5><List of progress codes><ipha6/progcodesmain.htm>
<5><Using progress codes><ipha6/progcodesusing.htm>
<4><Isolating problems><iphau/isolating.htm>
<5><Using failing item codes><iphau/failingitems.htm>
<5><Symbolic FRUs><iphau/fru.htm>
<5><Problem isolation procedures><iphau/pips.htm>
<6><Bus, HSL><iphau/pipbus.htm>
<7><Breaking down a RIO/HSL or PCI bus reference code><iphau/pipbusbreakrc.htm>
<7><DSA translation><iphau/pipbusdsabdown.htm>
<7><Card positions><iphau/pipbuscardpos.htm>
<7><Converting the loop number to NIC port location labels><iphau/pipbuslooptonic.htm>
<7><PCI bus isolation using AIX, Linux, or the HMC><iphau/pipbusaixhmc.htm>
<7><Verifying an HSL, bus, or multi-adapter bridge repair><iphau/pipbusverifying.htm>
<6><Communication><iphau/pipcomm.htm>
<6><Disk unit><iphau/pipdiskunit.htm>
<6><I/O processor (IOP)><iphau/pipsdiop.htm>
<6><Intermittent isolation procedures><iphau/pipint.htm>
<6><Licensed internal code (LIC)><iphau/piplic.htm>
<6><Logical partition><iphau/piplpar.htm>
<6><Operations Console><iphau/opcip.htm>
<6><Power><iphau/pippower.htm>
<6><Routers><iphau/piprtr.htm>
<6><Service processor><iphau/pipsp.htm>
<6><Tape unit isolation procedures><iphau/piptape.htm>
<6><Twinaxial workstation I/O processor><iphau/piptwinaxial.htm>
<6><Workstation adapter><iphau/pipwsa.htm>
<6><Workstation adapter console><iphau/wscip01.htm>
<5><Failing function codes><iphau/ffcodes.htm>
<6><Failing function code list><iphau/ffclist.htm>
<5><AIX fast path MAP><iphau/aixfastpath.htm>
<4><Resolving problems><iphau/resolving.htm>
<5><Finding part locations><iphau/locations.htm>
<6><Location codes><iphau/loccodes.htm>
<6><Model 520><iphau/locsqsf2.htm>
<6><Model 550><iphau/loc550.htm>
<6><Model 570><iphau/locsql4mlx.htm>
<6><5074, 8079-002, and 8093-002 expansion units><iphau/loc5074.htm>
<6><5079 expansion unit><iphau/loc5079.htm>
<6><0588 and 5088 expansion units><iphau/loc5088.htm>
<6><5094, 5294, and 8094-002 expansion units><iphau/loc5094.htm>
<6><0595 and 5095 expansion units><iphau/loc5095.htm>
<6><7311-D10 and 7311-D11 expansion units><iphau/locd11.htm>
<6><7311-D20 expansion unit><iphau/locd20.htm>
<6><Integrated xSeries adapter (IXA) card><iphau/locixa.htm>
<6><Addresses><iphau/addresses.htm>
<5><Part assembly diagrams><iphau/partassemblies.htm>
<6><Model 520><iphau/pa520.htm>
<6><Model 550><iphau/pa550.htm>
<6><Model 570><iphau/pa570.htm>
<6><0588, 5088, 5079, and 5294 expansion units><iphau/pafinal5088.htm>
<6><5074 and 5094 expansion units><iphau/pafinal5074.htm>
<6><0595 and 5095 expansion units><iphau/pafinal5095.htm>
<6><7311-D11 expansion unit><iphau/pad11.htm>
<6><7311-D20 expansion unit><iphau/pad20.htm>
<6><7014 rack><iphau/pa7014.htm>
<5><Part number catalog><iphau/partnumbers.htm>
<6><System parts><iphau/partssystem.htm>
<6><Cables><iphau/partscables.htm>
<6><Miscellaneous parts><iphau/partsmisc.htm>
<6><HMC parts><iphau/partshmc.htm>
<5><Removing and replacing parts><iphau/removereplace.htm>
<6><Model 520><iphau/rrsqsf2.htm>
<6><Model 550><iphau/rr550.htm>
<6><Model 570><iphau/rrsql4mlx.htm>
<6><5074, 5079, 8079-002, and 8093-002 expansion units><iphau/rr50745079.htm>
<6><0588 and 5088 expansion units><iphau/rr5088.htm>
<6><5094, 5294, and 8094-002 expansion units><iphau/rr5094.htm>
<6><0595 and 5095 expansion units><iphau/rr5095.htm>
<6><7311-D11 expansion unit><iphau/rrd11.htm>
<6><7311-D20 expansion unit><iphau/rrd20.htm>
<6><RIO/HSL cables><iphau/rrhslriocables.htm>
<6><Type 2748, 2757, 2763, 2778, 2780, 2782, 4758, 4764, 5703 cards><iphau/rrcards.htm>
<7><Replacing the cache battery pack><iphau/rrcachebatpack.htm>
<7><Replacing the cache directory card><iphau/rrcachedircard.htm>
<7><Replacing the battery on a type 4758 card><iphau/rr4758battery.htm>
<7><Disabling the cryptographic coprocessor on a type 4758 card><iphau/rr4758crypto.htm>
<7><Replacing the battery on a type 4764 card><iphau/rr4764battery.htm>
<7><Disabling the cryptographic coprocessor on a type 4764 card><iphau/rr4764crypto.htm>
<4><Verifying the repair><iphau/verifying.htm>
<5><Verifying the repair from the HMC><iphau/endcall.htm>
<5><Verifying the repair for i5/OS><iphau/verifyingos400.htm>
<6><Verifying a concurrent repair><iphau/verifyingos400con.htm>
<6><Verifying a dedicated repair><iphau/verifyingos400ded.htm>
<5><Verifying the repair for AIX><iphau/verifyingaix.htm>
<4><Reference information><iphau/referenceinfo.htm>
<5><i5/OS data recovery information><iphau/os400recovery.htm>
<6><Disk unit recovery procedures><iphau/recovdisk.htm>
<7><Starting disk service><iphau/recovdiskstart.htm>
<7><Exchanging a disk unit with a device parity protection><iphau/recovdiskdpp.htm>
<7><Exchanging a disk unit with mirrored protection><iphau/recovdiskmir.htm>
<7><Resuming mirrored protection><iphau/recovdiskrmp.htm>
<7><Saving data and initializing the disk unit><iphau/recovdiskinit.htm>
<7><Initializing the disk unit and copying to disk><iphau/recovdiskcopy.htm>
<7><Copy the contents of the LIC log><iphau/recovdiskdst.htm>
<6><SRC address formats><iphau/refcodeformats.htm>
<6><Storage I/O card modes and jumpers><iphau/jumpers.htm>
<7><Setting or changing the mode of an I/O card><iphau/jumpset.htm>
<7><Mode jumper has been overridden><iphau/jumpoverridden.htm>
<7><Mode jumper is missing><iphau/jumpmissing.htm>
<6><Logical partitions><iphau/lpar.htm>
<7><Determining if the system has logical partitions><iphau/lpardetermine.htm>
<7><Determining if the system has guest partitions><iphau/lparguest.htm>
<7><Determining the release level of a guest partition><iphau/lparguestrelease.htm>
<7><Determining the hosting partition of a guest partition><iphau/lparguesthost.htm>
<6><Load-source disks and alternate IPL devices><iphau/loadsrcdisks.htm>
<7><Finding the load-source disk on systems without mirrored protection><iphau/loadsrcnonmir.htm>
<7><Finding the load-source disk on systems with mirrored protection><iphau/loadsrcmir.htm>
<7><Alternate IPL device><iphau/loadsrcaltipl.htm>
<6><Reclaiming IOP cache storage><iphau/reclaimiop.htm>
<5><Powering on and powering off><iphau/onoff.htm>
<6><Powering on the system><iphap/crustartsys.htm>
<6><Powering off the system><iphap/crustopsys.htm>
<6><Powering on a partition><iphbl/iphblactivate.htm>
<6><Powering off a partition><iphbl/iphblpowerdownos400.htm>
<6><Powering off an expansion unit><iphau/offexpansion.htm>
<6><Using the control panel power button to power off><iphau/offpanelbutton.htm>
<5><Working with AIX diagnostics><iphau/working01.htm>
<6><General AIX diagnostic information><iphau/gen01.htm>
<6><Using online and standalone diagnostics><iphau/aixdiagnostics.htm>
<6><AIX tasks and service aids><iphau/aixserviceaids.htm>
<5><HMC machine code problems><iphau/hmcreference.htm>
<6><Viewing the HMC console logs><iphau/viewhmclogs.htm>
<5><Service functions><iphau/sfun.htm>
<6><Dedicated service tools (DST)><iphau/dst.htm>
<7><System paging environments><iphau/page.htm>
<8><Stand-alone paging (non-paging)><iphau/pagealone.htm>
<8><Limited paging><iphau/pagelimited.htm>
<8><Full paging><iphau/pagefull.htm>
<7><Accessing DST><iphau/hadst.htm>
<8><Performing an IPL to DST><iphau/xidst.htm>
<8><Changing a service tools user ID><iphau/chgstid.htm>
<8><Resetting the QSECOFR service tools user ID><iphau/resetqsecofr.htm>
<8><Performing an IPL to DST for secondary partitions><iphau/iplsp.htm>
<8><Pressing the system request key while the system is operational><iphau/req.htm>
<8><Selecting Function 21 while the system is operational><iphau/x21.htm>
<8><Performing an alternate IPL to DST><iphau/altdst.htm>
<7><Function keys in DST><iphau/fkeys.htm>
<7><Exiting DST><iphau/end.htm>
<7><DST options><iphau/dstmf.htm>
<8><Installing LIC><iphau/dstopilic.htm>
<8><Installing the operating system><iphau/dstopios.htm>
<8><Perform an IPL><iphau/pipl.htm>
<8><Work with LIC><iphau/ll.htm>
<8><Work with disk units><iphau/wdskdst.htm>
<9><Work with disk configuration><iphau/dskcf.htm>
<9><Display disk configuration><iphau/disdc.htm>
<9><Work with ASP threshold><iphau/aspt.htm>
<9><Work with ASP configuration><iphau/aspc.htm>
<9><Work with mirrored protection><iphau/mirr.htm>
<9><Work with device parity protection><iphau/devpa.htm>
<9><Work with disk compression><iphau/dskcomp.htm>
<9><Work with disk unit recovery><iphau/dskrec.htm>
<9><Disk unit problem recovery procedures><iphau/dupr.htm>
<8><Work with DST environment><iphau/contenv.htm>
<9><Work with active service tools><iphau/wactst.htm>
<9><Work with system devices><iphau/outprt.htm>
<9><Work with service tools user IDs><iphau/chgdst.htm>
<9><Work with system values><iphau/wwval.htm>
<9><Work with alternate installation device><iphau/dstbootload.htm>
<8><Select DST console mode><iphau/wwserv.htm>
<8><Start a service tool><iphau/dstool.htm>
<9><Display/Alter/Dump><iphau/dad.htm>
<9><Licensed internal code log><iphau/licl.htm>
<9><Licensed internal code trace><iphau/tlic.htm>
<9><Hardware service manager><iphau/hsman.htm>
<9><Main storage dump manager><iphau/msdm.htm>
<9><Product activity log (PAL)><iphau/pro.htm>
<9><Operator panel functions><iphau/oppanfun.htm>
<9><Performance data collector><iphau/perfdata.htm>
<9><Work with communications trace><iphau/wwct.htm>
<8><Perform automatic installation of the operating system><iphau/osautoinstall.htm>
<8><Save Licensed Internal Code (LIC)><iphau/savelic.htm>
<8><Work with save storage and restore storage><iphau/srstorage.htm>
<8><Work with remote service support><iphau/rdst.htm>
<9><Allowing access for remote service support><iphau/edst.htm>
<9><Activating remote service support><iphau/adst.htm>
<8><Work with system partitions><iphau/wrksysop.htm>
<8><Work with system capacity><iphau/wwcapacity.htm>
<8><Work with system security><iphau/wwsecurity.htm>
<8><End batch restricted state><iphau/endbatchrest.htm>
<6><Hardware service manager><iphau/hsm.htm>
<7><HSM options><iphau/hsmenu.htm>
<8><Packaging hardware resources><iphau/phr.htm>
<8><Logical hardware resources><iphau/lhr.htm>
<8><Locate resource by name><iphau/lr.htm>
<8><Failed and non-reporting resources><iphau/fai.htm>
<8><System Power Control Network (SPCN)><iphau/spcnh.htm>
<8><Work with service action log><iphau/gap.htm>
<8><Display label location work sheet><iphau/lloca.htm>
<8><Device concurrent maintenance><iphau/cncmnt.htm>
<7><Collecting information and performing functions from the HSM displays><iphau/keys.htm>
<8><Change resource details><iphau/cdet.htm>
<8><Concurrent maintenance><iphau/hsmconc.htm>
<8><Create frame information><iphau/crtf.htm>
<8><Debug the resource><iphau/dbug.htm>
<8><Display address><iphau/addrss.htm>
<8><Display associated resources><iphau/assoc.htm>
<8><Display card gap information><iphau/dispcardgap.htm>
<8><Display failed resources><iphau/dfai.htm>
<8><Display hardware contained within package><iphau/dispconthw.htm>
<8><Display location information><iphau/displocinfo.htm>
<8><Display non-reporting resources><iphau/dnonh.htm>
<8><Display resources associated with IOP><iphau/drai.htm>
<8><Display resource details><iphau/disprdetails.htm>
<8><Display resources requiring attention><iphau/requ.htm>
<8><Display resource status><iphau/stat.htm>
<8><Display serial/part numbers, logical address, and status/resource name information><iphau/dseri.htm>
<8><Display system bus resources><iphau/sbr.htm>
<8><Display system information><iphau/dspsysinfo.htm>
<8><Display unresolved locations><iphau/hsmun.htm>
<8><Print><iphau/rprt.htm>
<8><Refresh the display><iphau/refreshdsp.htm>
<8><Remove non-reporting resource info><iphau/hsmrem.htm>
<8><Reserve frame space><iphau/rfs.htm>
<8><Using high-speed link (HSL) specific options><iphau/hsloptions.htm>
<9><Display detail><iphau/hsldspdetail.htm>
<9><Display system information><iphau/dispsysinfo.htm>
<9><Display port information><iphau/dspportinfo.htm>
<9><Resources associated with loop><iphau/resassocloop.htm>
<8><Verify resources><iphau/vfyr.htm>
<7><Symbols on the HSM displays><iphau/indic.htm>
<7><Printing the system configuration list><iphau/pscl.htm>
<7><Verification procedures><iphau/vpro.htm>
<8><Hardware service manager - verify><iphau/hsmverify.htm>
<8><Verify optical storage unit><iphau/vfycd.htm>
<8><Verify tape><iphau/vfytap.htm>
<8><Verify communications><iphau/vfycmn.htm>
<6><Product activity log (PAL)><iphau/pal.htm>
<7><The Service Action Log (SAL)><iphau/sal.htm>
<7><PAL location><iphau/palloc.htm>
<7><Recovering from PAL errors while in DST><iphau/palrecov.htm>
<7><Paging environment><iphau/vdst.htm>
<7><Options and function keys><iphau/palop.htm>
<8><Analyze log><iphau/analyzelog.htm>
<8><Display or print by log ID><iphau/dspprtid.htm>
<8><Change PAL sizes><iphau/chgpalsizes.htm>
<8><Work with removable media lifetime statistics><iphau/intv.htm>
<8><Display or print removable media session statistics><iphau/dspprtstats.htm>
<8><Reference code description><iphau/refcodedesc.htm>
<8><Sort by... function><iphau/sortb.htm>
<8><Address information function><iphau/addin.htm>
<8><View description><iphau/viewdescfun.htm>
<8><Hexadecimal PAL data><iphau/hexdta.htm>
<7><Interpreting PAL reports><iphau/hiwelr.htm>
<8><Some considerations when interpreting PAL reports><iphau/palconsider.htm>
<8><Resource name><iphau/rn.htm>
<8><Resource type, model, and location><iphau/restml.htm>
<8><Class><iphau/class.htm>
<8><System reference code><iphau/srefcode.htm>
<8><Multiple SRC entries><iphau/multisrc.htm>
<8><Logical address format><iphau/la.htm>
<8><Sequence number><iphau/seqnum.htm>
<8><Secondary code><iphau/secondcode.htm>
<8><Table ID><iphau/tabid.htm>
<8><IPL source/state><iphau/iplss.htm>
<8><Hexadecimal reports><iphau/hexr.htm>
<9><More information from hexadecimal reports><iphau/diplpaliop.htm>
<6><Service reference procedures><iphau/srp.htm>
<7><Setting the system date and time><iphau/sdt.htm>
<7><Determining the dominant operating system><iphau/oprun.htm>
<7><System password><iphau/stpas.htm>
<7><System unique identifier><iphau/suid.htm>
<7><Determining a primary or alternate console><iphau/dpac.htm>
<7><Locating the system's load source from the system console><iphau/lsysload.htm>
<7><History file><iphau/hl.htm>
<7><Low-level debug (LLD) and data collecting procedures><iphau/lld.htm>
<8><Displaying data for functions 63 and 64><iphau/lld54c.htm>
<7><Logical partitions><iphau/lparinfo.htm>
<8><Examples: Missing or non-reporting system bus resources><iphau/missresc.htm>
<8><Determining the release level of a logical partition><iphau/lpardrlp.htm>
<8><Locating a partition's console and load source><iphau/lparspc.htm>
<8><Querying logical partition time and date><iphau/ptdq.htm>
<8><Finding the SRC history list for a logical partition><iphau/lparsrchist.htm>
<8><Accessing the panel functions of a logical partition><iphau/lparppf.htm>
<8><Determining which logical partition owns a FRU or system I/O resource><iphau/lpardopsior.htm>
<8><Selecting IPL source and mode for a logical partition><iphau/lparipltypmod.htm>
<7><IASP/Clustering><iphau/cluster.htm>
<8><Determining if a tower is configured as switchable under OptiConnect><iphau/switchtwr.htm>
<8><Determining the power controlling and current logical system ownership of a tower><iphau/twrowner.htm>
<8><Determining the resource name and HSL loop number of an HSL I/O bridge><iphau/resnameprocedure.htm>
<8><Switching ownership of a tower's switchable resources><iphau/switchowner.htm>
<8><Switching the mode of a tower's switchable resources><iphau/switchmode.htm>
<6><Control panel functions><iphau/cpfu.htm>
<7><Values for IPL types, key modes, and speeds><iphau/iplvalues.htm>
<7><Ways to access the control panel><iphau/cpfcways.htm>
<7><Control panel function descriptions><iphau/cpfdc.htm>
<8><Primary control panel functions><iphau/normfunc.htm>
<8><Extended control panel functions><iphau/extfunc.htm>
<8><Low-level debug (LLD) panel functions><iphau/lldfunc.htm>
<6><System reference code (SRC) information><iphau/srci.htm>
<7><SRC formats><iphau/srcd2.htm>
<8><Word 1 - SRC general information><iphau/x11.htm>
<8><Word 2 - System status information><iphau/xf12.htm>
<9><Main storage dump indicator (M)><iphau/f12m.htm>
<9><IPL state indicator (I)><iphau/f12i.htm>
<9><IPL type last initiated indicator (G)><iphau/f12g.htm>
<7><System reference codes (SRCs)><iphau/srcson.htm>
<8><SRC format description><iphau/srcformatdesc.htm>
<8><Hardware related SRC formats><iphau/vlcpsf.htm>
<8><Logical partition SRC descriptions and actions><iphau/lparurcs.htm>
<8><LIC detected PRC formats><iphau/fmt61.htm>
<8><LIC URC groups><iphau/vmcrc.htm>
<8><IPL status SRCs><iphau/iplsrc.htm>
<8><General status SRCs><iphau/gssrc.htm>
<6><Initial program load (IPL) information><iphau/iplin.htm>
<7><IPL type, mode, and speed options><iphau/idesct.htm>
<7><Methods to perform IPL><iphau/iplmethods.htm>
<7><Alternate installation IPL><iphau/bootload.htm>
<7><IPL sequence><iphau/iplsequence.htm>
<8><Service processor initialization><iphau/sp.htm>
<8><LIC initialization><iphau/hlic.htm>
<9><Log entries><iphau/logentries.htm>
<7><Status SRCs><iphau/ipls.htm>
<6><Licensed Internal Code (LIC)><iphau/lic.htm>
<7><Fixes and cumulative PTF packages><iphau/cum.htm>
<7><Displaying LIC fixes><iphau/ptfl.htm>
<7><Utilities to install and restore LIC><iphau/mir.htm>
<8><Utility to install LIC><iphau/mcl.htm>
<8><Utility to restore LIC><iphau/mcr.htm>
<7><Authorized Program Analysis Report (APAR)><iphau/aparmtr.htm>
<6><System architecture and configuration><iphau/ossf.htm>
<7><System power overview><iphau/spwo.htm>
<8><Power supply><iphau/pwrsup.htm>
<8><Battery power unit><iphau/xbpu.htm>
<8><System Power Control Network (SPCN)><iphau/spcn.htm>
<8><SPCN menu flow><iphau/spcn9.htm>
<9><Fields on the SPCN display><iphau/spcnfields.htm>
<9><Display detail option><iphau/ddr.htm>
<10><Fields on the Display Detail for Frame display><iphau/detframe.htm>
<10><Fields on the Display Detail for Unit display><iphau/detunit.htm>
<7><High speed link><iphau/hsl.htm>
<7><Multi-adapter bridge><iphau/multiadapt.htm>
<7><Resource names><iphau/names.htm>
<7><Hardware configuration restrictions><iphau/rest.htm>
<7><Communications card, cable, and wrap connector reference><iphau/comccwc.htm>
<7><Communications signal voltage levels><iphau/comsigvolt.htm>
<6><Working with storage dumps><iphau/srpa.htm>
<7><Automatic main storage dump><iphau/amsd.htm>
<7><Performing a main storage dump to disk (manual MSD)><iphau/msdtd.htm>
<7><Copying a main storage dump><iphau/copmsd.htm>
<8><Work with current main storage dump><iphau/wwcurdump.htm>
<8><Work with copies of main storage dumps><iphau/wwdumpcopies.htm>
<7><Main storage dump status><iphau/msds.htm>
<7><Error recovery for dumps><iphau/erp.htm>
<7><Performing a service processor storage dump><iphau/spdump_condor.htm>
<7><Copying the IOP storage dump to removable media><iphau/copydtd.htm>
<7><Copying the service processor storage dump to removable media (models 270, 8xx, SB2, SB3)><iphau/cpy_spdump.htm>
<7><Performing an IOP dump using HSM (all models)><iphau/duhsm.htm>
<7><IOP dump information in the PAL (all models)><iphau/dupal.htm>
<6><i5/OS operating system><iphau/os.htm>
<7><DST in i5/OS full paging environment><iphau/dsto.htm>
<7><DST in i5/OS limited paging environment><iphau/dstol.htm>
<7><System Service Tools (SST)><iphau/ssto.htm>
<8><Accessing SST><iphau/hasst.htm>
<8><SST options><iphau/sstmf.htm>
<9><Start a service tool><iphau/starttool.htm>
<9><Work with active service tools><iphau/wwactive.htm>
<9><Work with disk units><iphau/wwdsku.htm>
<9><Work with diskette data recovery><iphau/wwdd.htm>
<10><Processing restrictions><iphau/wwddprest.htm>
<10><Alter diskette data><iphau/add.htm>
<10><Read data from diskette><iphau/drd.htm>
<10><Write data to diskette><iphau/dwd.htm>
<10><Display diskette data><iphau/ddd.htm>
<10><Print reports><iphau/pdd.htm>
<10><How to use the Work with Diskette Data Recovery option><iphau/ddrhow.htm>
<9><Work with system partitions><iphau/wwsyspart.htm>
<9><Work with system capacity><iphau/wwscap.htm>
<9><Work with system security><iphau/wwssec.htm>
<9><Work with service tools user IDs><iphau/wwstid.htm>
<8><SST function keys><iphau/sstfunk.htm>
<7><Online problem analysis and resolution><iphau/opar.htm>
<8><System-detected problems><iphau/sdp.htm>
<9><Problem log><iphau/plog.htm>
<9><Messages relating to hardware failures><iphau/mpt.htm>
<8><Customer-detected problems><iphau/cdp.htm>
<8><Service support facility><iphau/supfac.htm>
<7><Displaying i5/OS PTFs><iphau/ptfo.htm>
<7><i5/OS or LIC APAR information><iphau/aparos.htm>
<7><How to reset an I/O processor card while the system is up and running><iphau/riop.htm>
<7><Varying configuration descriptions on and off><iphau/uvary.htm>
<7><Commonly used i5/OS service commands><iphau/cusc.htm>
<8><Work with System Value (WRKSYSVAL) command><iphau/xsysval.htm>
<8><Service attributes (DSPSRVA or  CHGSRVA) commands><iphau/srvval.htm>
<9><ANZPRBAUTO><iphau/anzp.htm>
<9><CRITMSGUSR><iphau/critmsgusr.htm>
<9><RPTPRBAUTO><iphau/rptprb.htm>
<9><RPTSRVPVD><iphau/srvpvd.htm>
<9><SNDDTAPKT><iphau/snddtapkt.htm>
<9><PTFINSTYP><iphau/ptfinst.htm>
<8><Change Transmit Level (CHGXMTLVL) command><iphau/chgxl.htm>
<8><Work with Hardware Products (WRKHDWPRD) command><iphau/wrkhrd.htm>
<9><Using the configuration description label information to prepare for a system upgrade><iphau/before.htm>
<9><Using the configuration description label information after a system upgrade><iphau/after.htm>
<7><Verify commands><iphau/vfyc.htm>
<8><Verify communications><iphau/vfy.htm>
<9><Procedure><iphau/vfyproc.htm>
<9><Test descriptions><iphau/tede.htm>
<10><Remote modem test><iphau/rmodem.htm>
<10><Local modem test><iphau/lmodem.htm>
<10><Communications cable test><iphau/commcab.htm>
<10><Communications I/O adapter test><iphau/commio.htm>
<10><Communications I/O processor test><iphau/commiop.htm>
<10><Communications I/O processor memory test><iphau/commiopm.htm>
<10><Communications port A modem and coupler test><iphau/commporta.htm>
<10><External ring test><iphau/extring.htm>
<10><Communications/LAN link test><iphau/commlan.htm>
<10><Wireless network management utility><iphau/wire.htm>
<10><Wireless echo back test><iphau/web.htm>
<10><2620/2628 cryptographic processor card test><iphau/cpct.htm>
<10><2620/2628 cryptographic processor card wrap test><iphau/cpcwt.htm>
<10><2620/2628 external cryptographic hardware tests><iphau/echt.htm>
<10><LocalTalk interface test><iphau/lti.htm>
<7><Communications test><iphau/commt.htm>
<8><Wireless LAN adapter card indicators><iphau/indi.htm>
<8><Communications interface trace><iphau/cinttrace.htm>
<8><Concurrent LPDA-2 tests><iphau/lpda.htm>
<5><Setting expansion unit configuration ID and MTMS value><iphau/setconfigid.htm>
<5><Updating the world-wide port name><iphau/rrcardsupdateport.htm>
<5><Forms><iphau/forms.htm>
<6><Problem summary form><iphau/fmpsf.htm>
<6><Work with electrostatic discharge-sensitive parts><iphau/fmesd.htm>
<6><Service log><iphau/fmsrvlog.htm>
<6><HSL loop configuration and status form><iphau/fmhslform.htm>
<6><HSL link status diagnosis form><iphau/fmhsldiagchart.htm>
<6><Installed features in a PCI bridge set form><iphau/fmpciinstalled.htm>
<6><HSL cable location form><iphau/fmhslcableloctab.htm>
<4><Related information><iphau/related.htm>
<1><相關鏈結><ichwrelated.htm>
<1><Glossary><iphav/iphwglos.htm>
